Panel PCs Features PPC-IPS-AE 12-30 VDC input/24 VDC output, Uninterruptible Power Supply Module ƒ ƒ 50W (2.1A @ 24Vdc) output, 25.2Wh with auto shut down function to PC ƒ ƒ With changeable battery pack for easy maintenance ƒ ƒ Wide Range power input for 12 - 30 Vdc ƒ ƒ Supports over discharging protection to extend battery life ƒ ƒ Metal enclosure supports VESA 75/ VESA 100 and DIN Rail mounting ƒ ƒ With status indicators for monitoring battery pack and input power ƒ ƒ With accessible switch for adjusting timing (30sec / 6 min), to execute auto shut down PC ƒ ƒ With free software utility for configuration and monitoring Introduction This lightweight and intelligent power management module protects a Panel PC from electrical damage and greatly reduces the risk of losing data. The IPS module serves as temporary power supply during a break in power and allows a safe system shutdown. It can be easily installed on DIN-rail or on the back of a Panel PC. Specifications Input Input Voltage 12 -30 Vdc Input power rating 90 W Charging current 2 A Output Output Voltage 24Vdc +/-10% Max. output current 2.5 A Battery Battery Capacity 14.4 VDC, 1750 mAH Cycle life 300 times of charge circle (Above 60% capacity compared to the initial state) Protection Short-circuit protection Yes Over discharge protection IPS shuts down when 5% of battery capacity (Default) Certification EMC CE, FCC, CCC, BSMI Safety UL, CB, CCC, BSMI Dimensions 151.8 x 125 x 37.2 mm (5.98" x 4.92" x 1.46") Environment Operating Temperature 0 ~ 50°C (Din rail mounting) 0-45°C (VESA mounting, secured with PPC) Storage Temperature -20 ~ 50°C Relative Humidity 10 ~ 95% @ 40°C (non-condensing) Shock Operating 10 G peak acceleration (11 ms duration), follow IEC 60068-2-27 Vibration Operating Random Vibration Test 5 ~ 500Hz, 1Grms, follow IEC 60068-2-64 I/O Connectors PS_ON to shut down PC RS-232 for monitoring and setting IPS Din-rail Mount VESA Mount Chapter 11 Table of Contents Table of Contents