Remote DA&C Systems Features Introduction The ADAM-5000L/TCP and ADAM-5000/TPC are both Ethernet-based I/O systems. Without a repeater, the ADAM-5000L/TCP and ADAM-5000/TCP can cover a communication distance up to 100 m. This allows remote configuration via Ethernet and sixteen PCs can simultaneously access the data. The ADAM-5000L/TCP and ADAM-5000/TCP are the solutions for easy configuration and efficient management. It is an ideal and cost-effective solution for eAutomation architecture. ADAM-5000L/TCP ADAM-5000/TCP ƒ ƒ Cortex M4 CPU ƒ ƒ 10/100Base-T auto-negotiation high-speed communication port ƒ ƒ Supports Modbus/TCP for easy integration ƒ ƒ Supports UDP event handling function ƒ ƒ Up to 100 m communication distance w/o repeater ƒ ƒ Allows remote configuration via Ethernet ƒ ƒ Allows concurrent access for 16 host PCs ƒ ƒ 4 I/O slots for up to 64 points and 8 I/O slots for up to 128 points data monitoring and control ƒ ƒ 1500 VDC isolation for Ethernet communication ƒ ƒ Built-in watchdog timer for system auto-reset ƒ ƒ Windows utility - I/O modules configuration and calibration - Network auto searching - Data stream setting - Current status monitoring and alarm trigger ƒ ƒ Provides C and .NET class library to develop applications ƒ ƒ Support GCL function for easy IO interlocking logic Specifications Control System ƒ ƒ CPU Cortex M4 ƒ ƒ I/O Slots ADAM-5000L/TCP: 4 ADAM-5000/TCP: 8 ƒ ƒ Memory Flash ROM:1 MB ƒ ƒ Operating System Real-time OS ƒ ƒ LED Indicators Power (3.3 V) RUN Communication (Link, Active, 10/100 Mbps, Tx, Rx) ƒ ƒ Storage 1 x MicroSD slot Communications (Ethernet) ƒ ƒ Data Transfer Rate Up to 100 Mbps ƒ ƒ Event Response Time < 5 ms ƒ ƒ Interface 2 x RJ-45 sharing one MAC Address ƒ ƒ Wiring UTP, category 5 or greater Communications (Serial) ƒ ƒ Comm. Distance RS-485: 1.2 km (4000 feet) RS-232: 15 m ƒ ƒ Comm. Protocol Modbus/RTU ƒ ƒ Data Transfer Rate Up to 115.2 kbps ƒ ƒ Interface 1 x DB9-M for RS-485 1 x DB9-F for RS-485 1 x DB9-F for RS-232 (System Monitoring) ƒ ƒ Max. Nodes 15 (in RS-485 daisy-chain network for Remote I/O connection) Power ƒ ƒ Power Consumption 4.0 W @ 24 VDC (ADAM-5000L/TCP) (not including I/O modules) 5.0 W @ 24 VDC (ADAM-5000/TCP) (not including I/O modules) ƒ ƒ Power Input Unregulated 10 ~ 30 VDC Software ƒ ƒ API VS.NET Llass Library ƒ ƒ Windows Utility Network setting, I/O configuration & calibration, data stream, alarm setting ƒ ƒ Modbus/TCP OPC Server Protection ƒ ƒ Communication Line 3.000 VDC Isolation ƒ ƒ I/O Module Isolation 3.000 VDC ƒ ƒ LAN Communication 1.500 VDC ƒ ƒ Overvoltage Protection Yes ƒ ƒ Power Reversal Yes Protection General ƒ ƒ Certification CE, FCC class A ƒ ƒ Connectors 1 x DB9-M/DB9-F/screw terminal for RS-485 (communication) 1 x DB9-F for RS-232 (internal use) 1 x Screw-terminal for power input 2 x RJ-45 for LAN ƒ ƒ Dimensions (W x H x D) ADAM-5000L/TCP: 231 x 110 x 75 mm ADAM-5000/TCP: 355 x 110 x 75 mm ƒ ƒ Enclosure ABS+PC ƒ ƒ Mounting DIN-rail, wall Environment ƒ ƒ Operating Humidity 5 ~ 95%, non-condensing ƒ ƒ Operating Temperature - 10 ~ 70°C (14 ~ 158°F) ƒ ƒ Storage Temperature - 25 ~ 85°C (-13 ~ 185°F) Ordering Information ƒ ƒ ADAM-5000L/TCP 4-slot Ethernet-based Distributed DA & C System ƒ ƒ ADAM-5000/TCP 8-slot Ethernet-based Distributed DA & C System 4-slot Distributed DA&C System for Ethernet 8-slot Distributed DA&C System for Ethernet ADAM-5000/TCP ADAM-5000L/TCP RoHS COMPLIANT 2002/95/EC Chapter 13 Table of Contents Table of Contents