Ethernet I/O Modules: ADAM-6000 ADAM-6200 Series Selection Guide Model ADAM-6217 ADAM-6224 ADAM-6250 ADAM-6251 ADAM-6256 ADAM-6260 ADAM-6266 Interface 10/100Mbps Ethernet Peer-to-Peer1 Yes Receiver Only2 Yes Yes Yes Yes Yes GCL1 Yes Yes Yes Yes Yes Yes Yes Analog Input Channels 8 - - - - - - Input Impedance >10MΩ (voltage) 120 Ω (current) - - - - - - Voltage Input ± 150mV, ± 500mV, ± 1V, ± 5V, ± 10V - - - - - - Current Input 0 ~ 20 mA, 4 ~ 20mA, ± 20mA - - - - - - Sampling Rate (sample/second) 10 - - - - - - Direct Sensor Input - - - - - - - Burn-out Detection Yes (4 ~ 20 mA) - - - - - - Resolution 16-bit - - - - - - Accuracy ± 0.1% of FSR (Voltage) at 25°C ± 0.2% of FSR (Current) at 25°C - - - - - - Analog Output Channels - 4 - - - - - Voltage Output - 0 ~ 5V, 0 ~ 10V, ± 5V, ± 10V - - - - - Current Output - 0 ~ 20mA, 4 ~ 20mA - - - - - Resolution - 12-bit - - - - - Digital Input/Output Input Channels - 4 (Dry contact only) 8 16 - - 4 Output Channels - - 7 (Sink) - 16 (Sink) - - Relay Output - - - - - 6 (5 Form C + 1 Form A) 4 (Form C) Contact Rating - - - - - 250 VAC @ 5A 30 VDC @ 5A Counter Input - - 3kHz 3kHz - - 3kHz Frequency Input - - 3kHz 3kHz - - 3kHz Pulse Output - - 5kHz - 5kHz 5kHz 5kHz LED Indicator - - 8 DI, 7 DO 16 DI 16 DO 6 RL 4 DI, 4 RL Power Consumption 3.5W 6W 3W 2.7W 3.2W 4.5W 4.2W Isolation Voltage 2,500 VDC Watchdog Timer System (1.6 seconds) Communication (Programmable) Communication Protocol Modbus TCP, TCP/IP, UDP, HTTP, DHCP Power Requirements 10 - 30 VDC (24 VDC standard) Operating Temperature -10 ~ 70°C (14 ~ 158°F) Storage Temperature -20 ~ 80°C (-4 ~ 176°F) Operating Humidity 20 ~ 95% RH (non-condensing) Storage Humidity 0 ~ 95% RH (non-condensing) Page 15-13 15-13 15-14 15-14 15-14 15-15 15-15 Note 1: Peer-to-Peer and GCL cannot run simultaneously, only one feature is enabled at one time. Note 2: ADAM-6224 can only act as a receiver and generate analog output when using Peer-to-Peer or GCL. Chapter 15 Table of Contents Table of Contents