Industrial Ethernet Soultions Features EKI-5524SS/MM Series 4-port + 2x100FX port (Single/Multi-mode, SC/ST type), Fast Ethernet ProView Switch Specifications Communications ƒ ƒ Standard IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az ƒ ƒ LAN 10/100Base-T(X), 100Base-FX ƒ ƒ Transmission Distance Ethernet: Up to 100 m Multi-mode Fiber: Up to 2 km (EKI-5524MM Series) Single-mode Fiber: Up to 30 km (EKI-5524SS Series) ƒ ƒ Optical Fiber Multi-Mode (EKI-5524MM/MMI/MM-ST/MMI-ST) Wavelength:1310nm Tx Power: -14/-20 dBm Rx Sensitivity: -32 dBm Parameters: 50/125 um, 62.5/125 um Single-Mode (EKI-5524SS/SSI/SS-ST/SSI-ST) Wavelength: 1310 nm Tx Power: -8/-15 dBm Rx Sensitivity: -34 dBm Parameters: 9/125 um ƒ ƒ Transmission Speed Up to 100 Mbps Interface ƒ ƒ Connectors 4 x RJ45 ports 2 x SC/ST type fiber optic connectors 6-pin screw Terminal Block (including relay) ƒ ƒ LED Indicators P1,P2, P-Fail, Loop detection 10/100T(X): Link/Activity, Speed Switch Properties ƒ ƒ MAC Table Size 2K ƒ ƒ Packet Buffer Size 1M bit ƒ ƒ Switching Capacity 1.2 Gbps ƒ ƒ Jumbo Frame 9216 bytes Power ƒ ƒ Power Consumption Max. 4 W ƒ ƒ Power Input 12 ~ 48 VDC (8.4 ~ 52.8 VDC), redundant dual inputs ƒ ƒ Fault Output 1 Relay Output Mechanism ƒ ƒ Dimensions (W x H x D) 43 x 120 x 84 mm ƒ ƒ Enclosure IP30, metal shell with solid mounting kits ƒ ƒ Mounting DIN-Rail, Wall Protection ƒ ƒ Reverse Polarity Present ƒ ƒ Overload Current Present Environment ƒ ƒ Operating Temperature EKI-5524SS/SS-ST/MM/MM-ST: -10 ~ 60°C (14 ~ 140°F) EKI-5524SSI/SSI-ST/MMI/MMI-ST: -40 ~ 75°C (-40 ~ 167°F) ƒ ƒ Storage Temperature -40 ~ 75°C (-40 ~ 167°F) ƒ ƒ Operating Humidity 10 ~ 95% (non-condensing) ƒ ƒ Storage Humidity 10 ~ 95% (non-condensing) ƒ ƒ MTBF 144,890 hours Certification ƒ ƒ Safety IEC/EN 60950-1, UL508, Class 1 Division 2, IECEx, ATEX ƒ ƒ EMC CE, FCC ƒ ƒ EMI EN 55011/55022 Class A, EN 61000-6-4, FCC Part 15 Subpart B Class A ƒ ƒ EMS EN61000-4-2 (ESD) Level 3 EN61000-4-3 (RS) Level 3 EN61000-4-4 (EFT) Level 3 EN61000-4-5 (Surge) Level 3 EN61000-4-6 (CS) Level 3 EN61000-4-8 (Magnetic Field) Level 3 ƒ ƒ Shock IEC 60068-2-27 ƒ ƒ Freefall IEC 60068-2-32 ƒ ƒ Vibration IEC 60068-2-6 Ordering Information ƒ ƒ EKI-5524SS 4-port +2x100FX port (Single -mode, SC type), Fast Ethernet ProView Switch ƒ ƒ EKI-5524SSI 4-port + 2x100FX port (Single-mode, SC type), Fast Ethernet ProView Switch with Wide Temperature ƒ ƒ EKI-5524MM 4-port + 2 x100FX port (Multi-mode,SC type), Fast Ethernet ProView Switch ƒ ƒ EKI-5524MMI 4-port + 2 x100FX port (Multi-mode,SC type), Fast Ethernet ProView Switch with Wide Temperature ƒ ƒ EKI-5524SS-ST 4-port + 2 x100FX port (Single-mode,ST type), Fast Ethernet ProView Switch ƒ ƒ EKI-5524SSI-ST 4-port + 2 x100FX port (Single-mode,ST type), Fast Ethernet ProView Switch with Wide Temperature ƒ ƒ EKI-5524MM-ST 4-port + 2 x100FX port (Multi-mode,ST type), Fast Ethernet ProView Switch ƒ ƒ EKI-5524MMI-ST 4-port + 2 x100FX port (Multi-mode,ST type), Fast Ethernet ProView Switch with Wide Temperature ƒ ƒ Communicates with SCADA software via Modbus/TCP ƒ ƒ Communicates with NMS (Networking management system) via SNMP ƒ ƒ Port-based QoS for deterministic data transmission ƒ ƒ -40 ~ 75°C operating temperature range (EKI-5524SSI/SSI-ST,EKI-5524MMI/ MMI-ST only) ƒ ƒ 12 ~ 48 VDC (8.4 ~ 52.8 VDC) wide-range power input ƒ ƒ EMS level 3 protection for extreme outdoor environments ƒ ƒ IEEE 802.3az Energy Efficient Ethernet (EEE) ƒ ƒ Jumbo Frame Support (Up to 9,216 Bytes) ƒ ƒ Supports redundant 12 ~ 48VDC power input and P-Fail relay ƒ ƒ Loop detection Introduction The EKI-5524SS/SSI/SS-ST/SSI-ST and EKI-5524MM/MMI/MM-ST/MMI-ST are the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. EKI-5524SS/SSI/SS-ST/SSI-ST and EKI-5524MM/MMI/MM-ST/MMI- ST switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75’C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance. EKI-5524SS Series EKI-5524MM Series RoHS COMPLIANT 2011/65/EU Chapter 17 Table of Contents Table of Contents