Control Cabinet PCs Features UNO-1252G Intel® Quark Micro DIN-rail Gateway w/ 2 x LAN, 2 x mPCIe, 2 x COM, 8 x DI/O, 2 x USB, 1 x 1GB microSD card, 1 x SIM ƒ ƒ Intel® Quark X1001 400 MHz Processor with 256MB Memory ƒ ƒ 2 x LAN, 2 x mPCIe, 1 x RS-232, 1 x RS-232/485, 8 x DI/O, 2 x USB, 1 x 1GB microSD card, 1 x SIM ƒ ƒ COM ports and Digital I/O with Isolation Protection design for Sensing and Controlling ƒ ƒ Chassis Grounding Protection ƒ ƒ Compact with Fanless Design ƒ ƒ DIN-rail mounting design ƒ ƒ Supports GPRS/3G/GPS/Wi-Fi Communication by iDoor Technology ƒ ƒ Supports Yocto Linux system Introduction The UNO-1252G is an Intel Quark DIN-rail controller for IoT gateway solution. This controller features dual LAN ports and mPCIe card slots for economic gateway application bridging cloud and brown area. The general purpose input/output ports also success gateway controller directly reading status of sensors and indicating required results. The UNO-1252G is also equipped with Advantech iDoor technology that employs iDoor modules to extend itself to become a wireless gateway. In addition, the UNO-1252G also features eight LED indicators for the status of Power, Battery, SD card, COM ports and three programmable indicators. ƒ ƒ Isolated DI/O 4-ch digital input, 4-ch digital output (Isolation Protection 1000 VDC , Overvoltage protection 30 VDC) ƒ ƒ Power Connector 1 x 3 Pin, Terminal Block ƒ ƒ Grounding Protection Chassis Grounding ƒ ƒ SIM 1 x SIM card slot Environment ƒ ƒ Operating Temperature - 20 ~ 60°C (-4 ~ 140°F) @ 5 ~ 85% RH ƒ ƒ Storage Temperature - 40 ~ 85°C ( -40 ~ 185°F) ƒ ƒ Relative Humidity 10 ~ 95% RH @ 40°C, non-condensing ƒ ƒ Shock Protection Operating, IEC 60068-2-27, 50G, half sine, 11ms ƒ ƒ Vibration Protection Operating, IEC 60068-2-64, 2 Grms, random, 5 ~ 500Hz, 1 hr/axis Installation Scenario Specifications General ƒ ƒ Certification CE, FCC, CCC, BSMI, UL ƒ ƒ Dimensions (W x D x H) 63 x 105 x 100 mm (2.48" x 4.13" x 3.94") ƒ ƒ Form Factor Micro Size ƒ ƒ Enclosure Aluminum Housing ƒ ƒ Mounting DIN-rail ƒ ƒ Weight (Net) 0.6 kg (1.33 lbs) ƒ ƒ Power Requirements 10~36 VDC ƒ ƒ Power Consumption 10 W (Typical) ƒ ƒ OS Support Yocto Linux System Hardware ƒ ƒ BIOS 8MB SPI Flash ƒ ƒ Processor Intel Quark X1001 400 MHz ƒ ƒ System Chip Integrated Intel SoC Chipset ƒ ƒ Memory On-board 256 MB DDR3 800 MHz ƒ ƒ LED Indicators LEDs for Power (PWR) , battery (BTR), COM1~2 (Tx/Rx) and microSD (SD), Programmable Indicators (PL1~3) ƒ ƒ Storage 1 x microSD Slot (1GB microSD card included) ƒ ƒ Expansion 1 x Full-size mPCIe with USB signal, 1 x Full-size mPCIe with PCIe signal, 1 x iDoor I/O front plate I/O Interfaces ƒ ƒ Isolated Serial Ports 1 x RS-232, DB9, 50~115.2 kbps, supports console debug 1 x RS-232/485, DB9, 50~115.2 kbps (Isolation Protection 1000 VDC) ƒ ƒ LAN Ports 2 x RJ45, 10/100 Mbps (DHCP supported by LAN A) ƒ ƒ USB Ports 1 x USB 2.0 (type-A), 1 x USB Client (micro-B) NEW RoHS COMPLIANT 2002/95/EC DIN-rail Mount Illustration Chapter 7 Table of Contents Table of Contents