www.advantech.com/products Online Download NEW APAX-5060 APAX-5080 Specifications General ƒ ƒ Dimensions (W x H x D) 30 x 139 x 100 mm ƒ ƒ Weight 195 g ƒ ƒ Power Consumption 2 W @ 24 VDC (typical) ƒ ƒ Status Display LED per channel On: Logic level 1 Off: Logic level 0 Relay Output ƒ ƒ Channels 12 ƒ ƒ Relay Type Form A (SPST) ƒ ƒ Switching Capacity and Lifetime of the Contact (for resistive load) VDE: 30,000 operations (5 A @ 250 VAC, 10 operations/minute at 8°C) 70,000 operations (5 A @ 30 VDC, 10 operations/ minute at 85°C) UL: 60,000 operations (5 A @ 250 VAC) 100,000 operations (5 A @ 30 VDC) Mechanism: 20,000,000 operations (no load, 300 operations/min) ƒ ƒ Breakdown Voltage 500 VAC (50/60 Hz) ƒ ƒ Contact Resistance 30 mΩ (maximum) ƒ ƒ Insulation Resistance 1 GΩ (minimum) at 500 VDC Protection ƒ ƒ Isolation Between 2,500 VDC Channels and Backplane Environment ƒ ƒ Operating Temperature -10 ~ 60°C (when mounted vertically) -20 ~ 70°C (for PE version) ƒ ƒ Storage Temperature -40 ~ 70°C ƒ ƒ Relative Humidity 5 ~ 95% (non-condensing) Ordering Information ƒ ƒ APAX-5060 12-ch Relay Output Module APAX-5060 APAX-5080 12-ch Relay Output Module 4/8-ch High/Low Speed Counter Module Specifications General ƒ ƒ Dimensions (W x H x D) 30 x 139 x 100 mm ƒ ƒ Weight 170 g ƒ ƒ Power Consumption 2.5 W @ 24 VDC (typical) ƒ ƒ Status Display LED per channel (for DI/O only) On: Logic level 1; Off: Logic level 0 Counter/Frequency Input ƒ ƒ Channels & Mode 8 (Up Counter, High/Low Freq. and Wave Width mode) 4 (Pulse and Direction, Up/Down Pulse, A/B Phase) ƒ ƒ Counting Range 32-bit + 1-bit overflow ƒ ƒ Minimum Pulse Width 1 μs for High Freq. mode; 1 ms for Low Freq. mode ƒ ƒ Counter Frequency 0.1 Hz ~ 10 Hz for Low Freq. mode and Wave Width mode 10 Hz ~ 1M Hz for High Freq. mode and other modes ƒ ƒ Input Voltage For "0" signal: 0 ~ 3 VDC; For "1" signal: 10 ~ 30 VDC ƒ ƒ Accuracy 0.1% for Low Freq. mode ƒ ƒ Input Filter 0.1 us ~ 40 ms Digital Input ƒ ƒ Channels 4 ƒ ƒ Type Sink (wet contact) ƒ ƒ Input Voltage For "0" signal: 0 ~ 3 VDC; For "1" signal: 10 ~ 30 VDC Digital Output ƒ ƒ Channels 4 (sink type) ƒ ƒ Output Voltage Range 8 ~ 35 VDC ƒ ƒ Normal Output Current 0.5 A (per channel) Protection ƒ ƒ Isolation Between 2,500 VDC Channels and Backplane ƒ ƒ Short Circuit Protection (For DO channel) ƒ ƒ Thermal Shutdown Protection (For DO channel) Environment ƒ ƒ Operating Temperature -10 ~ 60°C (when mounted vertically) ƒ ƒ Storage Temperature -40 ~ 70°C ƒ ƒ Relative Humidity 5 ~ 95% (non condensing) Ordering Information ƒ ƒ APAX-5080 4/8-ch High Speed Counter Module NEW RoHS COMPLIANT 2002/95/EC RoHS COMPLIANT 2002/95/EC Power & Energy Automation 8 5 4 4 10 Panel PCs 9 iDoor Technology Modules 8 Industrial monitors 7 Industrial IoT Gateways 6 Control Cabinet PCs High-Performance Control Panels Industrial Operator Panels 3 2 IntelligentMotionControl andMachineVision 1 11 Control IPCs 12 Remote DA&C Systems 13 Wireless IoT Sensing Devices 14 15 RS-485 I/O Modules 16 Thin-Client Terminals Industrial Ethernet Solutions 17 IP Gateway and Serial Device Servers iNetworking 18 19 WebAccess+ Solution Ethernet I/O Modules Chapter 12 Table of Contents Table of Contents