2-38 www. m oxa. com Introduction to IEC 61850-3 Ethernet Switches 2 Industry-Specific Ethernet Switches > Industry-Specific Ethernet Switches IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP Software Features Management: IPv4/IPv6, SNMPv1/v2c/v3, DHCP Server/Client, BootP, TFTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, DHCP Option 66/67/82, LLDP, Flow Control, Back Pressure Flow Control, SNMP Inform, Port Mirror, Syslog Filter: IGMPv1/v2/v3, GMRP, GVRP, 802.1Q, Q-in-Q VLAN Redundancy Protocols: STP/RSTP, MSTP, Turbo Ring v1/v2, Turbo Chain, Link Aggregation, VRRP Security: RADIUS, TACACS+, SSL, SSH, Port Lock, Broadcast Storm Protection Unicast Routing: Static routing, RIP V1/V2, OSPF Multicast Routing: DVMRP and PIM-DM Time Management: SNTP, NTP Server/Client, IEEE 1588v2 PTP Industrial Protocols: EtherNet/IP, Modbus/TCP MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Groups 1, 2, 3, 9 Power Substation: IEC 61850 QoS Switch Properties Priority Queues: 4 Max. Number of VLANs: 64 VLAN ID Range: VID 1 to 4094 IGMP Groups: 256 Interface Fast Ethernet: Slots 1, 2, and 3 for combinations of 2, 4, 6, or 8-port PM-7200 Fast Ethernet modules with 10/100BaseT(X) (TP/M12 interface), 100BaseFX (SC/ST/MTRJ connector), or 100BaseSFP Gigabit Ethernet: Slot 4 for 2 or 4-port PM-7200 Gigabit Ethernet combo module, 10/100/1000BaseT(X) or 1000BaseSFP Console Port: RS-232 (RJ45) Alarm Contact: 1 relay output with current carrying capacity of 3 A @ 30 VDC or 3 A @ 240 VAC Power Requirements Input Voltage: • 24 VDC • 48 VDC • 110/220 VDC/VAC Operating Voltage: • 18 to 36 V (24 VDC) • 36 to 72 V (48 VDC) • 88 to 300 VDC, 85 to 264 VAC (110/220 VDC/VAC) Input Current: (all ports are equipped with fiber) • Max. 2.38 A @ 24 VDC • Max. 1.12 A @ 48 VDC • Max. 0.59/0.30 A @ 110/220 VDC • Max. 0.49/0.26 A @ 110/220 VAC Overload Current Protection: Present Connection: 10-pin terminal block Reverse Polarity Protection: Present Physical Characteristics Housing: Aluminum alloy IP Rating: IP30 protection Dimensions: 440 x 44 x 325 mm (17.32 x 1.73 x 12.80 in) Weight: 5900 g (13.11 lb) Installation: 19-inch rack mounting Environmental Limits Operating Temperature: -40 to 85°C (-40 to 185°F), cold start requires min. of 100 VAC at -40°C Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 60950-1 EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 IEC 61000-4-11 Rail Traffic: EN 50155*, EN 50121-4 Note: Please check Moxa’s website for the most up-to-date certification status. Transportation: NEMA TS2 Electrical Substation: IEC 61850-3, IEEE 1613 MTBF (mean time between failures) Time: 393,828 hrs Standard: Telcordia SR332 Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Dimensions Unit: mm (inch) Rear View Top View Front View Side View 44 (1.73) 44 (1.73) 440 (17.32) 325 (12.80) 349.3 (13.75) 480 (18.90) 462.6 (18.21) 37.9 (1.49) 5.6 (0.22) Ø 6 . 3 ( Ø 0 . 2 5 ) 31.8 (1.25)