2-35 www.mo xa .c o m Industrial Ethernet 2 Industry-Specific Ethernet Switches > PT-7710 Series 31.8 (1.3) 24.3 (1.0) 24.3 (1.0) 44.0 (1.7) 31.8 (1.3) 44.0 (1.7) 219.3 (8.6) 219.3 (8.6) 195.0 (7.7) 195.0 (7.7) 209.4 (8.2) 266.5 (10.5) 266.5 (10.5) 271.6 462.5 (18.5) 31.8 (1.3) 52.5 Dimensions Unit: mm (inch) Side View Front View Front View Top View Top View Rear View Rack Mounting Wall Mounting IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP Software Features Management: IPv4/IPv6, SNMPv1/v2c/v3, DHCP Server/Client, BootP, TFTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, DHCP Option 66/67/82, LLDP, Flow Control, Back Pressure Flow Control, SNMP Inform, Port Mirror, Syslog Filter: IGMPv1/v2, GMRP, GVRP, 802.1Q, VLAN Unaware, Port-Based VLAN, GVRP Redundancy Protocols: STP/RSTP, MSTP, Turbo Ring v1/v2, Turbo Chain, Link Aggregation Security: RADIUS, TACACS+, SSL, SSH, Port Lock, Rate Limit Time Management: SNTP, NTP Server/Client, IEEE 1588v2 PTP (software-based) Industrial Protocols: EtherNet/IP, Modbus/TCP MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 Switch Properties Priority Queues: 4 Max. Number of VLANs: 64 VLAN ID Range: VID 1 to 4094 IGMP Groups: 256 Interface Fast Ethernet: Slot 1 for any combination of 2, 4, 6, or 8-port PM-7200 Fast Ethernet modules with 10/100BaseT(X) (TP/M12 interface), 100BaseFX (SC/ST/MTRJ connector), or 100BaseSFP; Slot 2 for 1 or 2-port interface modules with 100BaseFX (SC/ST connector) Gigabit Ethernet: Slot 2 for 2-port PM-7200 Gigabit Ethernet combo module, 100/1000BaseT(X) or 1000BaseSFP Console Port: RS-232 (RJ45) Alarm Contact: 1 relay output with current carrying capacity of 3 A @ 30 VDC or 3 A @ 240 VAC Power Requirements Input Voltage: • LV: 12/24/48 VDC • HV: 110/220 VDC/VAC Note: Compliant with EN 50155 on 12/24/48/110 VDC Operating Voltage: • LV: 9 to 60 V • HV: 88 to 300 VDC, 85 to 264 VAC Input Current: (all ports are equipped with fiber) • Max. 0.75 A @ 24 VDC • Max. 0.39 A @ 48 VDC • Max. 0.16/0.10 A @ 110/220 VDC • Max. 0.19/0.11 A @ 110/220 VAC Overload Current Protection: Present Connection: 10-pin terminal block Reverse Polarity Protection: Present Physical Characteristics Housing: Aluminum alloy IP Rating: IP30 protection Dimensions: 266.5 x 44 x 195 mm (10.5 x 1.7 x 7.7 in) Weight: 2200 g (4.89 lb) Installation: 19-inch rack mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: -40 to 85°C (-40 to 185°F); cold start requires min. of 100 VAC at -40°C Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 60950-1, CSA C22.2 No. 60950-1, EN 60950-1 EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 IEC 61000-4-11 Rail Traffic: EN 50155*, EN 50121-4 *Complies with a portion of EN 50155 specifications. Please contact Moxa or a Moxa distributor for details. Note: Please check Moxa’s website for the most up-to-date certification status. Transportation: NEMA TS2 Electrical Substation: IEC 61850-3, IEEE 1613 MTBF (mean time between failures) Time: 416,1008 hrs Standard: Telcordia SR332 Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty