2-35 www.mo xa .c o m Industrial Ethernet 2 Industry-Specific Ethernet Switches > PT-508/510 Series DlN-Rail 35.00 51.6 42.8 34 67 67 51.6 42.8 34 80 110 160 30.5 15.25 20 29 30.5 15.25 37 21.5 20 29 114.5 72 34 160.0 (6.3) 30.5 (1.2) 15.3 (0.6) 29.0 (1.1) 20.0 (0.8) 29.0 (1.1) 37.0 (1.5) 11.5 (0.5) 114.5 (4.5) 34.0 (1.3) 72.0 (2.8) 60.0 (2.4) 110.0 (4.3) 20.0 (0.8) 15.3 (0.6) 30.5 (1.2) Dimensions PT-510 Unit: mm (inch) Front View Side View DIN-Rail Mounting Kit DIN-Rail Mounting Kit Rear View PT-508 Front View Side View DIN-Rail Mounting Kit Switch Properties Priority Queues: 4 Max. Number of VLANs: 64 VLAN ID Range: VID 1 to 4094 IGMP Groups: 256 MAC Table Size: 8 K Packet Buffer Size: 1 Mbit Interface RJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection Fiber Ports: 100BaseFX ports (SC/ST/LC/MTRJ connector) Console Port: RS-232 (RJ45) Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC Power Requirements Input Voltage: • 24 VDC • 48 VDC • 110/220 VDC/VAC Operating Voltage: • 18 to 36 V (24 VDC) • 36 to 72 V (48 VDC) • 88 to 300 VDC, 85 to 264 VAC (110/220 VDC/VAC) Input Current: (all ports are equipped with fiber) PT-508: • Max. 0.27 A @ 24 VDC • Max. 0.12 A @ 48 VDC • Max. 0.084/0.043 A @ 110/220 VDC • Max. 0.18/0.11 A @ 110/220 VAC PT-510: • Max. 0.39 A @ 24 VDC • Max. 0.18 A @ 48 VDC • Max. 0.10/0.052 A @ 110/220 VDC • Max. 0.234/0.148 A @ 110/220 VAC Overload Current Protection: Present Connection: 5-pin terminal blocks Reverse Polarity Protection: Present Physical Characteristics Housing: Aluminum alloy IP Rating: IP40 protection Dimensions: PT-508: 60 x 160 x 110 mm (2.36 x 6.30 x 4.33 in) PT-510: 80 x 160 x 110 mm (3.15 x 6.30 x 4.33 in) Weight: PT-508: 995 g (2.21 lb) PT-510: 1210 g (2.69 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: -40 to 85°C (-40 to 185°F), cold start requires min. of 100 VAC at -40°C Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 508 EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: PT-508: 20 V/m PT-510: 35 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power; 4 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 IEC 61000-4-11 Electrical Substation: IEC 61850-3, IEEE 1613 Note: Please check Moxa’s website for the most up-to-date certification status. MTBF (mean time between failures) Time: PT-508: 394,238 hrs PT-510: 372,276 hrs Standard: Telcordia SR332 Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty