2-66 www. m oxa. com Introduction to IEC 61850-3 Ethernet Switches 2 Industry-Specific Ethernet Switches > Industry-Specific Ethernet Switches EOM-G103-PHR-PTP Series IEC 62439-3 3-port full Gigabit embedded managed redundancy modules The EOM-G103-PHR-PTP series full Gigabit managed redundancy modules are designed for device manufacturers who would like to embed and integrate the advanced IEC 62439-3 supported modules with minimum effort into their products to enhance performance and reliability of certain mission-critical applications. IEC 62439-3 Clause 4 (PRP) and IEC 62439-3 Clause 5 (HSR) are the newest standardized redundancy protocols for industrial automation networks where zero recovery time is needed. PRP and HSR are suitable for electrical substation automation and other mission-critical applications that cannot tolerate any system downtime. The EOM-G103-PHR-PTP series modules are compliant with the latest IEC 62439-3 standards and provide an easy and cost-effective integrated solution for adding a redundancy module to a non-IEC 62439-3 supported product. The modules support two IEC 62439-3 Ethernet ports for constructing PRP or HSR networks: SGMII (MAC mode) / SERDES (1000BaseX). It also includes one standard Ethernet port SGMII (MAC mode) / SERDES (1000BaseX) for connecting with standard IEEE 802.3 Ethernet devices. Additionally, the EOM-G103- PHR-PTP series provides an extra SGMII (MAC mode) / SERDES (1000BaseX) for building up a local access Ethernet console port to easily maintain, control, and manage devices at the local site. Introduction • PRP (Parallel Redundancy Protocol): Transmit or receive two independent active paths to/from different LANs simultaneously in a zero recovery time network. • HSR (High-availability Seamless Redundancy): Every frame is duplicated and then transmitted in both directions of the HSR ring to deliver zero switchover time. • Hardware-based IEEE 1588v2 PTP (Precision Time Protocol) end-to-end one-step transparent clock for precise time synchroni- zation of networks. • Configurable via CLI. General Features and Benefits Specifications › ›IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant › ›3 SGMII pinouts reserved for PRP/HSR (LAN A/LAN B/Inter Link) and an extra 1 SGMII reserved for Ethernet console connection Technology Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX Software Features Management: IPv4 / IPv6, SNMP v1/v2c/v3, Telnet/SSH, LLDP, Flow Control, Back Pressure Flow Control, Port Mirror, Fiber Check, Syslog, RMON Filter: Multicast Filter Behavior Redundancy Protocols: PRP/HSR, RSTP Transparent Security: RADIUS, TACACS+, Trusted Access Control, Authentication Certificate (SSL Certificate, SSH Key Regenerate) Time Management: SNTP, NTP Server/Client, IEEE 1588v2 PTP Industrial Protocols: Modbus/TCP Power Substation: MMS Interface Ethernet Ports: 3, SGMII (MAC mode) / SERDES (1000BaseX) (PRP/ HSR LAN A/LAN B/INTERLINK) Connectors: 1 connector with 2 x 40 pins, and 1 connector with 2 x 10 pins Console Port: Ethernet console (SGMII (MAC mode) / SERDES (1000BaseX)) GPIO: 3 programmable I/O pins Power Requirements Input Current: Max. 1.625 W @ 3.3 V Physical Characteristics Dimensions: 80 x 1.6 x 65 mm (3.15 x 0.06 x 2.56 in) Weight: 28.6 g (0.06 lb) Environmental Limits Operating Temperature: -40 to 60°C (-40 to 140°F) Note: Products with a higher operating temperature are available by special request. Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing)