3-3 www.mo xa .c o m Industrial Ethernet 3 Ethernet Media Converters and Extenders > Product Selection Guide Ethernet-to-Fiber Media Converters PTC-101 Series (LV models) PTC-101 Series (HV models) IMC-P101 Series IMC-101G Series IMC-21GA Series IMC-101 Series IMC-21A Series IMC-21 Series IEEE Standards IEEE 802.3af – – – – – – – Interface RJ45 Ports 10/100BaseT(X) 10/100/1000BaseT(X) 10/100/1000BaseT(X), auto MDI/MDI-X 10/100BaseT(X) M12 Port – – – – – – – Fiber Modes Multi-mode Fiber / Single-mode Fiber Multi-mode Fiber / Single-mode Fiber Fiber Ports 100BaseFX (SC, ST, or LC connectors) 100BaseFX (SC or ST connectors) Optional 1000BaseSX/ LSX/LX/LH/LHX/ZX/EZX (LC connector) 100/1000BaseSX/LX or 100/1000BaseSFP slot 100BaseFX (SC or ST connectors) 100BaseFX (SC or ST) LED Indicators PWR1, PWR2, Fiber Link/ Act, 10/100M (TP port) PWR, Fiber Link/Act, 10/100M (TP port) PWR1, PWR2, Fiber Link/ Act, PSE Indicator, 10/100M (TP port) PWR1, PWR2, FAULT, 10/100M (TP port), 1000M (TP and Fiber port) PWR1, PWR2, G1 (copper port 10M/100M/1000M), G2 (fiber port 100M/1000M), 10/100M (TP port), 1000M (TP and Fiber port) PWR1, PWR2, FAULT, 10/100M (TP port), 100M (Fiber port), FDX/ COL (Fiber port) Power, 10/100M (TP port), 100M (fiber port), FDX/ COL (fiber port) DIP Switches Auto Negotiation, Force TP Speed, Force TP Duplex, Link Fault Pass Through, Operating Mode Auto Negotiation, Force TP Speed, Force TP Duplex, Link Fault Pass Through, Operating Mode, PSE, P.R.R. (PD Remote Reset) Port break alarm, Fault Pass-Through, Fiber AN/ Force Fiber speed 100M/1000M, Link Fault Pass-through, Energy Efficient Ethernet 100BaseFX Full/Half duplex selection, Port break alarm TP port’s 10/100M, Half/Full modes, and Force/Auto modes, fiber connection’s Full/Half mode, Link Fault Pass-Through (LFP) Alarm Contact Relay output: 1 A @ 24 VDC – Multi-mode Transmission Distance 1000BaseSX – See SFP-1G series datasheet See SFP-1G series datasheet (IMC-21GA-SX-SC) 100/1000BaseSX: 0 to 500 m, 850 nm (50/125 μm, 400 MHz*km) – 1000BaseLX – See SFP-1G series datasheet See SFP-1G series datasheet – Single-mode Transmission Distance 1000BaseLX – See SFP-1G series datasheet See SFP-1G series datasheet (IMC-21GA-LX-SC) 100/1000BaseLX: 0 to 10 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km) – 1000BaseLHX – See SFP-1G series datasheet See SFP-1G series datasheet – 1000BaseZX – See SFP-1G series datasheet See SFP-1G series datasheet – Physical Characteristics Housing Metal (IP30) Plastic (IP30) Dimensions (mm) 66.65 x 135.1 x 101.4 mm (5.99 x 4.86 x 2.62 in) 66.65 x 135.1 x 101.4 mm (5.99 x 4.86 x 2.62 in) 51.65 x 144.45 x 110.2 mm (2.03 x 5.69 x 4.34 in) 53.6 x 135 x 105 mm (2.11 x 5.32 x 4.13 in) 30 x 125 x 79 mm (1.19 x 4.92 x 3.11 in) 53.6 x 135 x 105 mm (2.11 x 5.32 x 4.13 in) 30 x 125 x 79 mm (1.19 x 4.92 x 3.11 in) 25 x 109 x 97 mm (0.98 x 4.29 x 3.82 in) Weight 690 g (1.52 lb) 690 g (1.52 lb) 525 g (1.16 lb) 630 g (1.39 lb) 170 g (0.37 lb) 630 g (1.39 lb) 170 g (0.37 lb) 125 g (0.27 lb) Installation DIN-rail mounting, wall mounting (with optional kit) DIN-rail mounting Environmental Limits Operating Temperature -40 to 85°C (-40 to 185°F) Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) -10 to 60°C (14 to 140°F) Operating Humidity 5 to 95% (non-condensing) Storage Temperature -40 to 85°C (-40 to 185°F) -40 to 75°C (-40 to 167°F) -40 to 70°C (-40 to 158°F) Power Requirements Input Voltage 20 to 72 VDC 85 to 264 VAC 88 to 300 VDC 48 VDC (46 to 57 VDC), redundant inputs 12 to 45 VDC redundant inputs 12 to 48 VDC redundant inputs 12 to 45 VDC redundant inputs 12 to 48 VDC Input Current 170 mA @ 20 VDC 73 mA @ 85 VAC 47 mA @ 88 VDC 130 mA @ 46 VDC 220 mA @ 12 VDC 285 mA @ 12 VDC 320 mA @ 12 VDC 265 mA @ 12 VDC 300 mA @ 12 VDC Connection Removable terminal block Overload Current Protection 1.6 A 1.6 A 1.6 A 2.5 A 1.5 A 1.1 A 1.1 A 1.1 A Reverse Polarity Protection PoE – – PSE, provides up to 15.4 W for PD – – – – – Standards and Certifications Safety UL 60950-1 UL 60950-1 UL 508 UL 508 UL 60950-1 UL 508, UL 60950-1 UL 60950-1 UL 508 EMI CISPR 22, FCC Part 15B Class A CISPR 22, FCC Part 15B Class A EMS EN 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV EN 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m EN 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV EN 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV EN 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m EN 61000-4-8 PFMF EN 61000-4-11 EN 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV EN 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m EN 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV EN 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV EN 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m EN 61000-4-8 PFMF EN 61000-4-11 EN 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV EN 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m EN 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV EN 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV EN 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m EN 61000-4-8 PFMF EN 61000-4-11 EN 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV EN 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m EN 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV EN 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV EN 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m EN 61000-4-8 PFMF EN 61000-4-11 EN 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV EN 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m EN 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV EN 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV EN 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m EN 61000-4-8 PFMF EN 61000-4-11 EN 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV EN 61000-4-3 RS: 80 MHz to 1 GHz: 1 V/m EN 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV EN 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV EN 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m EN 61000-4-8 PFMF EN 61000-4-11 EN 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV EN 61000-4-3 RS: 80 MHz to 1 GHz: 1 V/m EN 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV EN 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV EN 61000-4-6 CS: 150 kHz to 80MHz: 3 V/m EN 61000-4-8 PFMF EN 61000-4-11 Hazardous Location – – – UL/cUL Class1, Division 2, Groups A, B, C, and D, ATEX Class1, Zone 2, Ex nC IIC – UL/cUL Class1, Division 2, Groups A, B, C, and D, ATEX Class1, Zone 2, Ex nC IIC – – Electrical Substation IEC 61850-3, IEEE 1613 IEC 61850-3, IEEE 1613 – – – – – – Rail Traffc EN 50121-4 EN 50121-4 – – – – – – Freefall IEC 60068-2-32 Shock IEC 60068-2-27 Vibration IEC 60068-2-6 Maritime – – – – – DNV, GL – – MTBF Time: 1,211,613 hrs Standard: Telcordia (Bellcore), GB Time: 1,211,613 hrs Standard: Telcordia (Bellcore), GB Time: 435,210 hrs Standard: Telcordia (Bellcore), GB Time: 500,540 hrs Standard: Telcordia (Bellcore), GB Time: 2,573,203 hrs Standard: Telcordia (Bellcore), GB Time: 401,000 hrs Standard: MIL-HDBK-217F Time: 353,000 hrs Standard: MIL-HDBK-217F Time: 353,000 hrs Standard: MIL-HDBK-217F Reliability Warranty 5 years (see http://www.moxa.com/warranty) Page 3-9 3-9 3-12 3-14 3-22 3-16 3-18 3-20