3-9 www.mo xa .c o m Industrial Ethernet 3 Ethernet Media Converters and Extenders > PTC-101 Series Introduction The PTC-101 Ethernet-to-fiber media converters convert from 10/100BaseT(X) to 100BaseFX. Models are available with either SC, ST, or LC connectors. The PTC-101 converters eliminate the need for additional wiring, and support IEEE 802.3 and IEEE 802.3u/x protocols with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing Specifications to provide a total solution for your industrial Ethernet networks. The PTC-101 is compliant with essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD, and vibration, as well as conformal coating and power insulation, making the switches suitable for a variety of industrial applications. IEC 61850-3 and railway Ethernet-to-fiber media converters PTC-101 Series › ›10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X › ›Link Fault Pass-Through (LFP) › ›Power failure alarm by relay output (LV model only) › ›-40 to 85°C operating temperature range › ›Redundant dual DC power inputs (LV model only) › ›Integrated high-reliability power supply eliminates the need for external power transformer › ›Compliant with EN 50121-4 › ›Essential compliance with EN 50155* *Moxa defines “essential compliance” to include those EN 50155 requirements that make products more suitable for rolling stock railway applications. Technology Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X), 100BaseFX Interface RJ45/M12 Ports: 10/100BaseT(X) Fiber Ports: 100BaseFX (SC/ST/LC connectors) LED Indicators: PWR1, PWR2, Fiber Link, 10/100M (TP port) DIP Switches: DIP No. Function ON OFF 1 Auto Negotiation Enable Disable 2 Force TP Speed 100 Mbps 10 Mbps 3 Force TP Duplex Full Duplex Half Duplex 4 Link Fault Pass Throuth Enable Disable 5 Operating Mode Store-and-Forward Pass Through The default setting for all DIP switches is ON. Alarm Contact: One relay output with current carrying capacity of 1 A @ 24 VDC (LV model only) Optical Fiber 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 μm G.652 800 MHz*km Typical Distance 4 km 5 km 40 km Wave- length Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB). Physical Characteristics Housing: Metal, IP30 protection Dimensions: 152.15 x 123.46 x 66.65 mm (5.99 x 4.86 x 2.62 in) Weight: Product only: 690 g (1.52 lb) Packaged: 875 g (1.92 lb) Environmental Limits Operating Temperature: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Conformal Coating: Available upon request