3-16 www. m oxa. com Ethernet Media Converters and Extenders Ethernet Media Converters and Extenders > 3 IMC-101 Series Industrial Ethernet-to-fiber media converters The IMC-101 industrial media converters provide industrial-grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The IMC-101 converters’ reliable industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101 converter comes with a relay output warning alarm to help prevent damage and loss. The IMC-101 media Introduction Specifications converters are designed for harsh industrial environments, such as in hazardous locations (Class 1, Division 2/Zone 2, IECEx, DNV, and GL Certification), and comply with FCC, UL, and CE standards. The IMC- 101 series is available in models that support an operating temperature from 0 to 60°C, and an extended operating temperature from -40 to 75°C. All IMC-101 series converters are subjected to a 100% burn-in test. IMC-101 Series › ›10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X › ›Link Fault Pass-Through (LFP) › ›Power failure, port break alarm by relay output › ›Redundant power inputs › ›-40 to 75°C operating temperature range (T models) › ›Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx) Technology Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX Interface RJ45 Ports: 10/100BaseT(X) Fiber Ports: 100BaseFX (SC/ST connectors) LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M (Fiber port), FDX/COL (Fiber port) DIP Switches: 100BaseFX Full/Half duplex selection, port break alarm mask Alarm Contact: One relay output with current carrying capacity of 1 A @ 24 VDC Optical Fiber 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 μm G.652 800 MHz*km Typical Distance 4 km 5 km 40 km Wave- length Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB). Physical Characteristics Housing: Metal, IP30 protection Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) Weight: 630 g (1.39 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Power Requirements Input Voltage: 12 to 45 VDC redundant inputs Input Current: 320 mA @ 45 VDC max. Connection: Removable terminal block Overload Current Protection: 1.1 A Reverse Polarity Protection: Present Standards and Certifications Safety: UL 508 Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone2 Ex nA nC op is IIC T4 Gc, IECEx Ex nA nC IIC T4 Gc EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class A EMS: EN 61000-4-2 (ESD): Contact: 6 kV; Air: 8 kV EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m EN 61000-4-4 (EFT): Power: 2 kV; Signal: 2 kV EN 61000-4-5 (Surge): Power 1 kV; Signal 1 kV EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m EN 61000-4-8 (PFMF) EN 61000-4-11 Green Product: RoHS, CRoHS, WEEE Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Marine: DNV, GL