www. m oxa. com Industrial Wireless LAN Solutions Industrial Wireless LAN Solutions > AWK-5232 Series 6 6-18 Ordering Information Dimensions Unit: mm (inch) Front View Rear View Side View Top & Bottom Views Available Models AWK-5232-US: IEEE 802.11a/b/g/n dual-radio wireless AP/bridge/client, US band, -25 to 60°C operating temperature AWK-5232-US-T: IEEE 802.11a/b/g/n dual-radio wireless AP/bridge/client, US band, -40 to 75°C operating temperature AWK-5232- EU: IEEE 802.11a/b/g/n dual-radio wireless AP/bridge/client, EU band, -25 to 60°C operating temperature AWK-5232- EU -T: IEEE 802.11a/b/g/n dual-radio wireless AP/bridge/client, EU band, -40 to 75°C operating temperature AWK-5232-JP: IEEE 802.11a/b/g/n dual-radio wireless AP/bridge/client, JP band, -25 to 60°C operating temperature AWK-5232-JP-T: IEEE 802.11a/b/g/n dual-radio wireless AP/bridge/client, JP band, -40 to 75°C operating temperature Note: Please visit Moxa’s website for a complete list of optional wireless accessories and antennas available for Moxa’s wireless products. Package Checklist • AWK-5232 wireless AP/bridge/client • 4 2.4/5 GHz antennas: ANT-WDB- ARM-02 • DIN-rail kit • 2 plastic RJ protective caps for LAN and Console ports • Cable holder with 1 screw • Documentation and software CD • Quick installation guide (printed) • Warranty card RX Receive Sensitivity: 802.11b: -92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps 802.11g: -87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps 802.11n (2.4 GHz): -69 dBm @ MCS15 20 MHz, -71 dBm @ MCS7 20 MHz 802.11a: -87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps 802.11n (5 GHz): -68 dBm @ MCS15 40 MHz, -69 dBm @ MCS15 20 MHz, -70 dBm @ MCS7 40 MHz, -71 dBm @ MCS7 20 MHz Protocol Support General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, DHCP, VLAN, STP/RSTP Interface Default Antennas: 4 dual-band omni-directional antennas, 2 dBi, RP-SMA (male) Connector for External Antennas: RP-SMA (female) LAN Ports: 2, RJ45, 10/100/1000BaseT(X), auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection Console Port: RS-232 (RJ45-type) Reset: Present LED Indicators: PWR1, PWR2, PoE+, FAULT, STATE, WLAN1, WLAN2, 100M, 1000M Alarm Contact (digital output): 1 relay output with current carrying capacity of 1 A @ 24 VDC Digital Inputs: 2 electrically isolated inputs • +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA Management Device Management: Wireless Search Utility, SNMP Physical Characteristics Housing: Metal, IP30 protection Weight: 1320 g (2.91 lb) Dimensions: 75 x 135 x 105 mm (2.9 x 5.3 x 4.1 in) Installation: DIN-rail mounting (standard), wall mounting (optional) Environmental Limits Operating Temperature: Standard Models: -25 to 60°C (-13 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5% to 95% (non-condensing) Power Requirements Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet Plus (IEEE 802.3at compliant) Input Current: 1.5 A @ 12 VDC Connector: 10-pin removable terminal block Power Consumption: 18 W Reverse Polarity Protection: Present Standards and Certifications Safety: UL 60950-1, EN 60950-1 EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class B EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 3 V IEC 61000-4-8 Radio: EN 301 489-1/17, EN 300 328, EN 301 893, TELEC, FCC ID SLE-WAPN001 Note: Please check Moxa’s website for the most up-to-date certification status. MTBF (mean time between failures) Time: 290,422 hrs Standard: Telcordia SR332 Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty 135 (5.31) 104 (4.1) 75 (2.94)