11-8 www. m oxa. com Embedded Device Servers > Embedded Device Servers 11 MiiNePort E2 Series JP1 JP2 JP3 Pin Signal Name Function Pin Signal Name Function Pin Signal Name Function 1 Ethernet Tx+ Ethernet Transmit Data+ 1 100M LED Ethernet 100M LED 1 DIO0 Programmable Input/Output 2 Ethernet Tx- Ethernet Transmit Data- 2 10M LED Ethernet 10M LED 2 DI02 Programmable Input/Output 3 Ethernet Rx+ Ethernet Receive Data+ 3 LRXD Receive Serial Data 3 DI03 Programmable Input/Output 4 Ethernet Rx- Ethernet Receive Data- 4 LTXD Transmit Serial Data 4 DI01 Programmable Input/Output 5 LDCD Data Carrier Detect 5 Reserved N/A 6 RS485_EN RS-485 Enable 6 Reserved N/A 7 LRTS Request To Send 7 SW_Reset Reset to Factory Default 8 LDTR Data Terminal Ready 8 GND Circuit Ground 9 LDSR Data Set Ready 9 Ready LED System is Ready LED 10 LCTS Clear To Send 10 VCC Power Supply Pin Assignment JP2 JP1 JP3 4 1 10 1 MOXA MiiNe MPA702-I-V0B D6A328.00S-1 0936 1 10 Ordering Information 4 pin 10 pin Female Socket Connectors Package Checklist (modules) • MiiNePort E2 module Package Checklist (starter kits) • MiiNePort E2 module • MiiNePort E2 evaluation board • Universal power adapter • Power Cord: PWC-C7US-2B-183 • Power Cord: PWC-C7EU-2B-183 • Serial Cable: CBL-F9M9-150 • Ethernet Cable: CBL-RJ458P-100 • Documentation and software CD • Quick installation guide (printed) • Warranty card Available Modules MiiNePort E2: Embedded device server for TTL devices, drop-in module, 10/100M without RJ45 connector, 50 bps to 230.4 kbps baudrate, 0 to 55°C operating temperature MiiNePort E2-H: Embedded device server for TTL devices, drop-in module, 10/100M without RJ45 connector, 50 bps to 921.6 kbps baudrate, 0 to 55°C operating temperature MiiNePort E2-T: Embedded device server for TTL devices, drop-in module, 10/100M without RJ45 connector, 50 bps to 230.4 kbps baudrate, -40 to 85°C operating temperature MiiNePort E2-H-T: Embedded device server for TTL devices, drop-in module, 10/100M without RJ45 connector, 50 bps to 921.6 kbps baudrate, -40 to 85°C operating temperature Available Starter Kits MiiNePort E2-ST: Starter kit for the MiiNePort E2 Series, module included MiiNePort E2-H-ST: Starter kit for the MiiNePort E2-H Series, module included Optional Accessories (can be purchased separately) PWR-12125-DT-S1: Desktop power supply (requires power cord), 12 VDC, 1.25 A, 100 to 240 VAC PWC-C7US-2B-183: 10A/125V US power cord, 183 cm PWC-C7EU-2B-183: 2.5A/250V Continental European (EU) power cord, 183 cm CBL-F9M9-150: DB9 female to DB9 male serial cable, 150 cm CBL-RJ458P-100: 8-pin RJ45 CAT5 Ethernet cable, 100 cm Female Socket Connectors: Includes one 1x4 DIP, two 1x10 DIP