1-34 www. m oxa. com CM-600 Series 1 Industrial Ethernet Switches Industrial Ethernet Switches > CM-600 Series Fast Ethernet Interface Modules, CM-600 Series 4-port Fast Ethernet interface modules for EDS-600 series Ethernet switches Available Models (-40 to 75°C) Port Interface 10/100BaseT(X) 100BaseFX Multi-Mode, SC Connector Multi-Mode, ST Connector Single-Mode, SC Connector CM-600-4TX 4 – – – CM-600-4TX-BP* 4 – – – CM-600-4TX-PTP* 4 – – – CM-600-4MSC – 4 – – CM-600-4MST – – 4 – CM-600-4SSC – – – 4 CM-600-3MSC/1TX 1 3 – – CM-600-3MST/1TX 1 – 3 – CM-600-3SSC/1TX 1 – – 3 CM-600-2MSC/2TX 2 2 – – CM-600-2MST/2TX 2 – 2 – CM-600-2SSC/2TX 2 – – 2 *The CM-600-4TX-BP supports the bypass relay function on each port; the CM-600-4TX-PTP supports the IEEE 1588 PTPv2 protocol on each port. Specifications Ordering Information 129.2 (5.1) 27.4 (1.1) 135.4 (5.3) 144.4 (5.7) 29.7 (1.2) 139.2 (5.5) 144.8 (5.7) Front View Top View Side View Dimensions Unit: mm (inch) 129.2 (5.1) 27.4 (1.1) 135.4 (5.3) 144.4 (5.7) 29.7 (1.2) 139.2 (5.5) 144.8 (5.7) CM-600-4MST CM-600-4MSC CM-600-4SSC CM-600-2MSC/2TX CM-600-2SSC/2TX CM-600-2MST/2TX CM-600-3MSC/1TX CM-600-3SSC/1TX CM-600-3MST/1TX CM-600-4TX CM-600-4TX-BP CM-600-4TX-PTP Package Checklist • CM-600 interface module • Warranty card Interface RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Ports: 100BaseFX ports (SC/ST connector) Optical Fiber 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 μm G.652 800 MHz*km Typical Distance 4 km 5 km 40 km Wave- length Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB). Power Requirements Power Consumption: CM-600-4TX: 0.61 W CM-600-4TX-BP: 2.38 W CM-600-4TX-PTP: 3.46 W CM-600-4MSC/4MST/4SSC: 2.44 W CM-600-3MSC/1TX, -3MST/1TX, -3SSC/1TX: 2 W CM-600-2MSC/2TX, -2MST/2TX, -2SSC/2TX: 1.56 W Physical Characteristics IP Rating: IP30 protection Dimensions: 29.7 x 144.4 x 144.8 mm (1.17 x 5.69 x 5.7 in) Weight: CM-600-4TX: 190 g (0.42 lb) CM-600-4TX-BP: 240 g (0.53 lb) CM-600-4TX-PTP: 185 g (0.41 lb) CM-600-4MSC, -4MST, -4SSC: 240 g (0.53 lb) CM-600-3MSC/1TX, -3MST/1TX, -3SSC/1TX: 230 g (0.51 lb) CM-600-2MSC/2TX, -2MST/2TX, -2SSC/2TX: 230 g (0.51 lb) MTBF (mean time between failures) Time: 740,661 hrs Standard: Telcordia (Bellcore), GB Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty