TCC-80/80I Series Serial Media Converters > Serial Media Converters 14-22 www. m oxa. com 14 PIN RS-232 1 DCD 2 TxD 3 RxD 4 DSR 5 GND 6 DTR 7 CTS 8 RTS DB9 female connector DIP Switch Settings 5 4 3 2 1 9 8 7 6 DIP Switch Settings RS-422 with Terminator SW1 SW2 SW3 OFF OFF ON RS-422 SW1 SW2 SW3 OFF OFF OFF 4-wire RS-485 with Terminator SW1 SW2 SW3 ON OFF ON 4-wire RS-485 SW1 SW2 SW3 ON OFF OFF 2-wire RS-485 with Terminator SW1 SW2 SW3 ON ON ON 2-wire RS-485 SW1 SW2 SW3 ON ON OFF ON 1 2 3 TCC-80I TCC-80-DB9, TCC-80I-DB9 DB9 male RS-422/485 port PIN RS-422/RS-485-4w RS-485-2w 1 TxD+(B) – 2 TxD-(A) – 3 RxD+(B) Data+(B) 4 RxD-(A) Data-(A) 5 GND GND 6 – – 7 – – 8 – – 1 2 3 4 5 6 7 8 9 Dimensions Unit: mm (inch) 42.00 [1.654] 91.00 [3.583] 80.0 23.60 [0.929] TCC-80 Ordering Information Available Models TCC-80: Port-powered RS-232 to RS-422/485 converter with terminal block on the RS-422/485 side TCC-80-DB9: Port-powered RS-232 to RS-422/485 converter with DB9 male connector on the RS-422/485 side TCC-80I: Port-powered RS-232 to RS-422/485 converter with terminal block on the RS-422/485 side, and 2.5 kV optical isolation TCC-80I-DB9: Port-powered RS-232 to RS-422/485 converter with DB9 male connector on the RS-422/485 side, and 2.5 kV optical isolation Optional Accessories (can be purchased separately) CBL-F9M9-20: DB9 male to DB9 female RS-232 cable (20 cm) Note: Additional power adapters can be purchased separately. See Appendix A for details. Power Adapter: See Appendix A for details Package Checklist • 1 TCC-80 or TCC-80I media converter • CBL-USBAP-50: USB A male, 2.1 mm DC jack cable, 50 cm • Quick installation guide (printed) • Warranty card T+ 22.00 (0.87) 42.00 (1.65) 80.00 (3.15) 42.00 (1.65) T- R+ / D+ R- / D- GND 22.00 (0.87) Test Mode SW4 Std. Mode 42.00 (1.65) 42.00 (1.65) 22.00 (0.87) 22.00 (0.87) 80.00 (3.15)