ISD-1100-T/1200-T Series Serial Media Converters > Serial Media Converters 14-26 www. m oxa. com 14 Data line surge protectors The ISD-1100-T/1200-T series provides surge protection for serial data lines to prevent damage to devices such as modems, fax machines, I/O ports, terminals, instrumentation, hubs, and any other devices that use serial data connections. The ISD-1100-T/1200-T can add serial data line protection to a variety of serial connections: RS-232, RS-422, and RS-485. Introduction Specifications ISD-1100-T/1200-T Series › ›Plug and play › ›Surge protection for serial data lines • ISD-1110-T/1130-T: EN 61000-4-5 Level 4 • ISD-1210-T/1230-T: IEC 61632-21 C2 (20 kV protection) › ›Supports RS-232 or RS-422/485 › ›Compact size for easy installation › ›Wide temperature model available for -40 to 85°C environments Data Line Surge Protection Maximum Power Protection: ISD-1110-T/1130-T: 400 watts ISD-1210-T/1230-T: 5000 watts Number of Protected Lines: ISD-1110-T: 7 ISD-1130-T/1210-T/1230-T: 4 Surge Capacity: ISD-1110-T/1130-T: 4 kV, 8/20 μs impulse per line ISD-1210-T/1230-T: 20 kV, 8/20 μs impulse per line Working Voltage: ISD-1110-T/1210-T: 15 V ISD-1130-T/1230-T: 5 V Maximum Load Current: ISD-1110-T: 0.1 A (23°C), 0.05 A (85°C) ISD-1130-T: 0.12 A (23°C), 0.07 A (85°C) ISD-1210-T/1230-T: 0.4 A (20°C), 0.13 A (85°C) Response Time: < 1 ns Protection Mode: Line to line, line to ground Protection Rating: IP30 Bandwidth: 10 MHz loss < 1 dB Connectors ISD-1110-T: Data in: DB9 male Data out: DB9 female ISD-1130-T: Data in: Terminal block Data out: Terminal block ISD-1210-T/1230-T: Data in: Terminal block Data out: Terminal block Physical Characteristics Housing: ISD-1110-T/1130-T: Plastic ISD-1210-T/1230-T: Metal Dimensions: ISD-1110-T: 53 x 37 x 20.6 mm (2.01 x 1.46 x 0.81 in) ISD-1130-T: 53 x 37 x 20.6 mm (2.01 x 1.46 x 0.81 in) ISD-1210-T: 95 x 53 x 25 mm (3.74 x 2.01 x 0.98 in) ISD-1230-T: 95 x 53 x 25 mm (3.74 x 2.01 x 0.98 in) Weight: Product only ISD-1110-T: 58 g (0.13 lb) ISD-1130-T: 30 g (0.07 lb) ISD-1210-T: 214 g (0.47 lb) ISD-1230-T: 212 g (0.46 lb) Packaged ISD-1110-T: 119 g (0.26 lb) ISD-1130-T: 96 g (0.21 lb) ISD-1210-T: 276 g (0.61 lb) ISD-1230-T: 274 g (0.60 lb) Environmental Limits Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes. Operating Temperature: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 95% max, non-condensing Standards and Certifications EMS: ISD-1110-T/1130-T: EN 61000-4-5 (Surge): Signal: 4 kV ISD-1210-T/1230-T: IEC 61643-21 C2 (20 kV 1.2/50, 10 kA 8/20) Warranty and RMA Policy Warranty Period: 5 years (limited to 1-time use) Warranty Details: See www.moxa.com/warranty Note: ISD products will only be repaired once within 5 years of purchase. After the first repair, the product’s warranty will no longer be valid. RMA Policy: Moxa does not provide RMA service for ISD products whose PCB board was destroyed by a surge. Note: Be sure to purchase the ISD product with maximum surge protection suitable for your environment. ISD-1130-T ISD-1230-T ISD-1110-T ISD-1210-T