16-17 www.mo xa .c o m Smart Remote I/O > ioLogik E2200 Series Remote Automation 16 PC-Free Alarm and Control Intelligence SNMP Protocol for Ethernet Device Management The ioLogik E2200 supports simple and powerful Click&Go™ technology to configure event-driven reports and alarms delivered over email, TCP/UDP, or SNMP traps, giving you a powerful effective, tool for delivering time-stamped status updates in real time. With built-in Click&Go™ intelligence, the ioLogik E2200 can be configured for simple outputs paired up with simple input triggers without the need for a PC controller. This allows the ioLogik E2200 to be configured to automatically report I/O events according to user- specified conditions. In addition to Modbus/TCP, the ioLogik E2200 supports both SNMP and CGI scripting, giving IT engineers familiar tools for controlling and monitoring I/O systems. By using SNMP, IT engineers can configure the ioLogik E2200 to deliver alarms (traps) for specific I/O events, or use it to read or write directly to the I/O registers. For the strongest security, the ioLogik E2200 features SNMP v3, with authentication and encryption. With Moxa’s SNMP-capable ioLogik E2200, even IT professionals can easily integrate industrial sensors and servos over an Ethernet backbone, and with its strong network management tools the ioLogik E2200 is ideal for a wide variety of industrial applications, whether in environmental monitoring, telecommunications, power production and delivery, or transportation. ioLogik E2200 Series Moxa’s ioLogik E2200 Ethernet Remote I/O features the Click&Go programming interface. The ioLogik E2200 is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC- based monitoring, requires far less bandwidth than traditional polling methods. Smart Ethernet remote I/O with Click&GO Logic Introduction › ›Front-end intelligence with patented Click&Go control logic, up to 24 rules › ›Active communication with MX-AOPC UA Server › ›Save time and wiring cost with peer-to-peer communication › ›Supports SNMPv1/v2c/v3 › ›Friendly configuration via web browser › ›Simplify I/O management with MXIO library for Windows or Linux platforms › ›Wide operating temperature range of -40 to 75°C (-40 to 167°F)