www. m oxa. com Power Computers > DA-683 Series Power Computers 21-18 21 Hardware Specifications Rear View Computer CPU: Intel Atom D510 1.66 GHz processor OS: Linux, Windows Embedded Standard 2009, or Windows Embedded Standard 7 Note: The OS is pre-installed. System Chipset: Intel Pineview-D + ICH8M BIOS: 16 Mbit Flash BIOS, PCI Plug & Play, ACPI function support FSB: 667 MHz System Memory: 2 GB capacity, 1 GB (LX and XPE)/ 2 GB (W7E) pre-installed: 1 or 2 slots of 2 GB 200-pin DDR2-667 SO-DIMM Expansion Bus: PCI/104 interface reserved USB: USB 2.0 hosts x 4, Type A connector, supports system boot up Storage Built-in: 2 GB (LX and XPE) / 8 GB (W7E) industrial DOM onboard to store OS Storage Expansion: CompactFlash socket for CF card expansion, supporting CF Type-I/II HDD Support: 2 SATA connectors for drive expansion (with optional HDD kit) Other Peripherals KB/MS: 1 PS/2 interface, supports standard PS/2 keyboard and mouse through Y-type cable Display Graphics Controller: Intel® GMA3150 graphics controller in Intel D510 card DVI Interface: • Analog RBG display; output resolution up to 2048 x 1536 @ 60 Hz • Digital DVI display; output resolution up to 1024 x 768 @ 60 Hz Ethernet Interface LAN: Auto-sensing 10/100/1000 Mbps ports x 6 Magnetic Isolation Protection: 1.5 KV built-in Serial Interface Serial Standards: 2 RS-232 ports (DB9 male) Serial Signals RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND, RI Digital Input Input Channels: 4, source type Input Voltage: 0 to 30 VDC Digital Input Levels for Dry Contacts: • Logic level 0: Close to GND • Logic level 1: Open Digital Input Levels for Wet Contacts: • Logic level 0: +3 V max. • Logic level 1: +10 V to +30 V (source to DI) Connector Type: 10-pin screw terminal block (4 DI points, 4 DO points, DI source, GND) Isolation: 3 kV optical isolation Digital Output Output Channels: 4, sink type Output Current: Max. 200 mA per channel On-State Voltage: 24 VDC nominal, open collector to 30 V Connector Type: 10-pin screw terminal block (4 DI points, 4 DO points, DI source, GND) Isolation: 3 KV optical isolation LEDs System: Power, Storage Gigabit LAN: 100M x 6, 1000M x 6 Serial: TX/RX Programmable: LED x 8 Communication: Module A x 16, Module B x16 Switches and Buttons Power Switch: on/off (on rear panel) Reset Button: To reset system hardware (on front panel) Physical Characteristics Housing: SECC sheet metal (1 mm) Weight: 4 kg (8.89 lb) Dimensions: 315 x 440 x 90 mm (12.40 x 17.32 x 3.54 in) (without rackmount ears) Mounting: Standard 19-inch rackmount Environmental Limits Operating Temperature: Standard models: -10 to 60°C (14 to 140°F) DPP-T models: -40 to 70°C (-40 to 158°F) Storage Temperature: Standard models: -20 to 80°C (-4 to 176°F) DPP-T models: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Anti-Vibration: 7 mm (2-9 Hz), 20 m/s/s (9-200 Hz), 15 m/s/s (200-500 Hz) @ IEC-61850-3, IEC 60870-2-2/Cm/(3M6)/(4M6), sine wave, 2-500 Hz, 1 Oct/min, 10 cycles, 2 hrs 40 mins per axis Anti-Shock: 300 m/s2 @ IEC-61850-3, IEC 60870-2-2/Cm/(3M6)/ (4M6), half sine wave, 11 ms Power Requirements Input Voltage: 100 to 240 VAC, 50/60 Hz, 0.9-0.4 A Power Consumption: 40 W Standards and Certifications Safety: UL/cUL (UL 60950-1, CSA C22.2 No. 60950-1-03), LVD (EN 60950-1), CCC (GB4943) EMC: EN 61000-6-2/6-4 EMI: CISPR 22, FCC Part 15B Class A EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV IEC 61000-4-6 CS: Signal: 10 V IEC 61000-4-8: 20 A/m IEC 61000-4-9: 300 A/m IEC 61000-4-11: (AC models only) For DPP-T models only: IEC 61000-4-16: 30 V / 300 V IEC 61000-4-17: 10% nominal DC voltage IEC 61000-4-18: 100 kHz: 25k VCM; 1 kV DIM 1 MHz: 2.5 kV CM; 1 kV DM IEC 61000-4-29: 30% reduction, 0.1 sec. Green Product: RoHS, CRoHS, WEEE 19-inch Rackmount Ear 10/100/1000 Mbps Ethernet x 6 RS-232 Serial Port x 2 (DB 9 Male) Ground DVI-I PS/2 USB 2.0 Host x 2 Power Input 1 Power Input 2 Power Switch DI x 4, DO x 4 (Terminal Block) Module Slot A Module Slot B LED (Power, Storage)