www.mo xa .c o m Power Computers > UC-8100 Series Industrial Computing 21-37 21 Dimensions Unit: mm (inch) Hardware Specifications Computer CPU: ARMv7 Cortex-A8 300/600/1000 MHz USB: USB 2.0 hosts x 1, Type A connector DRAM: DDR3 SDRAM: UC-8112-LX: 512 MB UC-8162-LX: 512 MB UC-8132-LX: 256 MB UC-8131-LX: 256 MB OS (pre-installed): Debian ARM 7 (Kernel 3.2) Storage Storage Expansion: • SDHC/SDXC socket for storing OS and storage expansion • 1 GB SD card with OS pre-installed • MicroSD socket for storage expansion (UC-8112-LX only) • 2 GB MicroSD cards with OS pre-installed (UC-8112-LX only) Ethernet Interface LAN: Auto-sensing 10/100 Mbps ports (RJ45) x 2 Magnetic Isolation Protection: 1.5 kV built-in Serial Interface Serial Standards: RS-232/422/485 ports, software-selectable (5-pin terminal block connector) x 1 or 2 Console Port: RS-232 (TxD, RxD, GND), 4-pin pin header output (115200, n, 8, 1) Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: XON/XOFF, ADDC® (automatic data direction control) for RS-485 Baudrate: Max. 921600 bps Serial Signals RS-232: TxD, RxD, RTS, CTS, GND RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND RS-485-2w: Data+, Data-, GND LEDs System: Power x 1, USB x 1, SD x 1, signal strength x 3 (UC- 8112/8162/8132 with cellular module) LAN: 10M/100M on connector Programmable: Diagnosis x 3 Switches and Buttons Push Button: Initially configured to return a diagnostic report, and to reset the device to factory defaults Physical Characteristics Housing: Polycarbonate plastic Weight: 224 g (0.50 lb) Dimensions: 101 x 27 x 128 mm (3.98 x 1.06 x 5.04 in) Mounting: DIN-rail, wall (with optional kit) Environmental Limits Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 80°C (-40 to 176°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Anti-Vibration: 2 Grms @ IEC 60068-2-64, random wave, 5-500 Hz, 1 hr per axis (without any USB devices attached) Anti-Shock: 20 g @ IEC 60068-2-27, half sine wave, 30 ms Power Requirements Input Voltage: 12 to 24 VDC (3-pin terminal block, V+, V-, SG) Input Current: • 450 mA @ 12 VDC • 225 mA @ 24 VDC Power Consumption: 5.4 W (without cellular module and external USB device attached) Standards and Certifications Safety: UL 60950-1, EN 60950-1 EMC: EN 61000-6-2/6-4 EMI: CISPR 22, FCC Part 15B Class A 128 (5.04) 27 (1.06) 101 (3.98) 9 (0.35)