1-65 Industrial Ethernet 1 EDS-G512E-8PoE-4GSFP Series Industrial Ethernet Switches > www.mo xa .c o m Dimensions Unit: mm (inch) Side View Front View Rear View DIN-Rail/Panel-Mounting Kit Top / Bottom Views 135(5.3) 144.25(5.7) 144.2(5.7) 137(5.4) 79.2(3.1) 30(1.2) 18(0.7) 51.6(2) 30.5(1.2) 66.93(2.6) 20(0.8) 67(2.6) 15.25(0.6) 34(1.3) 48(1.9) 13(0.5) 63.83(2.5) 20(0.8) 20(0.8) VLAN ID Range: VID 1 to 4094 IGMP Groups: 2048 MAC Table Size: 8 K Packet Buffer Size: 1 Mbit Jumbo Frame Size: 9.6 KB Interface RJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed Fiber Ports: 100/1000BaseSFP slot Console Port: USB-serial console (Type B connector) Storage Port: USB storage (Type A connector for ABC-02-USB) PoE Pinout: V+, V+, V-, V-, for pin 1, 2, 3, 6 (Endspan, MDI, Mode A) DIP Switches: Turbo Ring, Master, Coupler, Reserve Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC Digital Inputs: 1 input with the same ground, but electrically isolated from the electronics. • +13 to +30 V for state “1” • -30 to +3 V for state “0” • Max. input current: 8 mA Button: Reset button Power Requirements Input Voltage: 48 VDC, redundant dual inputs Operating Voltage: 44 to 57 VDC (> 50 VDC for PoE+ output recommended) Input Current: 5.42 A @ 48 VDC Overload Current Protection: Present Connection: 2 removable 4-contact terminal blocks Reverse Polarity Protection: Present Note: When selecting power supply, check the PD power consumption. Power Consumption: Max. 20.16 W full loading without PDs’ consumption Power Budget: Max. 240 W for total PD consumption Max. 36 W for each PoE port Physical Characteristics Housing: Metal IP Rating: IP30 protection Dimensions: 79.2 x 135 x 137 mm (3.1 x 5.3 x 5.4 in) Weight: 1540 g (3.40 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 508, EN60950-1 (LVD) EMC: EN 61000-6-2/6-4 EMI: CISPR 22, FCC Part 15B Class A EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV IEC 61000-4-6 CS: Signal: 10 kV IEC 61000-4-8 Electrical Substations: IEC 61850-3, IEEE 1613 Rail Traffic: EN 50121-4 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Note: Please check Moxa’s website for the most up-to-date certification status. MTBF (mean time between failures) Time: 361,368 hrs. Standard: Telcordia (Bellcore), GB Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Ordering Information Available Models Port Interface Standard Temperature (-10 to 60˚C) Wide Temperature (-40 to 75˚C) PoE+, 10/100/1000BaseT(X) 100/1000BaseSFP* EDS-G512E-8PoE-4GSFP EDS-G512E-8PoE-4GSFP-T 8 4 *Note: The EDS-G512E-8PoE series supports up to 4 100/1000BaseSFP slots. See page 4 and 5 for SFP-1G/1FE series Gigabit/Fast Ethernet SFP module product information. Optional Accessories (can be purchased separately) MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes EDS-SNMP OPC Server Pro: OPC server software that works with all SNMP devices ABC-02-USB: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60°C operating temperature DR-75-48/120-48: 75/120 W DIN-rail 48 VDC power supplies DRP-240-48: 240 W DIN-rail 48 VDC power supplies SDR-480P-48: 480 W DIN-rail 48 VDC power supplies WK-51-01: Wall-mounting kit, 2 plates with 6 screws RK-4U: 4U-high 19-inch rack-mounting kit Package Checklist • EDS-G512E-8PoE switch • USB Cable: CBL-USBA/B-100 • Protective caps for unused ports • Documentation and software CD • Warranty card • Hardware installation guide (printed)