1-67 Industrial Ethernet 1 EDS-P510A-8PoE Series Industrial Ethernet Switches > www.mo xa .c o m Available Models Port Interface Gigabit Ethernet Fast Ethernet Standard Temperature (-10 to 60˚C) Wide Temperature (-40 to 75˚C) Combo Port, 10/100/1000BaseT(X) or 100/1000BaseSFP* PoE+, 10/100BaseT(X) EDS-P510A-8PoE-2GTXSFP EDS-P510A-8PoE-2GTXSFP-T 2 8 *The EDS-P510A-8PoE series supports 2 100/1000BaseSFP slots. See the SFP-1G and SFP-1FE datasheets for Gigabit/Fast Ethernet SFP module product information. Ordering Information Dimensions Unit: mm (inch) Side View Front View Rear View DIN-Rail/Panel-Mounting Kit 105 (4.13) 72 (2.83) 70 (2.76) 67 (2.64) 67 (2.64) 51.6 (2.03) 51.6 (2.03) 42.8 (1.69) 42.8 (1.69) 34 (1.34) 34 (1.34) 79.2 (3.12) 135 (5.31) 7 8 5 6 3 4 1 10/100 10/100/1000 PoE+ EDS-P510A-8PoE-2GTXSFP 2 PoE+ G1 G2 PWR1 PWR2 FAULT MSTR/HEAD CPLR/TAIL Optional Accessories (can be purchased separately) MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes EDS-SNMP OPC Server Pro: OPC server software that works with all SNMP devices ABC-01: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60°C operating temperature DR-75-48/120-48: 75/120 W DIN-rail 48 VDC power supplies DRP-240-48: 240 W DIN-rail 48 VDC power supplies RK-4U: 4U-high 19-inch rack-mounting kit WK-46: Wall-mounting kit, 2 plates with 8 screws Package Checklist • EDS-P510A-8PoE switch • Serial Cable: CN20070 • Protective caps for unused ports • Documentation and software CD • Hardware installation guide (printed) • Warranty card Interface RJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed Fiber Ports: 100/1000BaseSFP slot Console Port: RS-232 (RJ45 connector) PoE Pinout: V+, V+, V-, V- for pin 1, 2, 3, 6 (Endspan, MDI, Mode A) DIP Switches: Turbo Ring, Master, Coupler, Reserve Alarm Contact: 1 relay output with current carrying capacity of 0.5 A @ 48 VDC Digital Inputs: 1 input with the same ground, but electrically isolated from the electronics. • +13 to +30 V for state “1” • -30 to +3 V for state “0” • Max. input current: 8 mA Power Requirements Input Voltage: 48 VDC, redundant dual inputs Operating Voltage: 44 to 57 VDC Input Current: 5.36 A @ 48 VDC Overload Current Protection: Present Connection: 2 removable 2-contact terminal blocks Reverse Polarity Protection: Present Power Consumption: Max. 17.28 W full loading without PDs’ consumption Power Budget: Max. 240 W for total PDs’ consumption Max. 36 W for each PoE port Physical Characteristics Housing: Metal IP Rating: IP30 protection Dimensions: 79.2 x 135 x 105 mm (3.12 x 5.31 x 4.13 in) Weight: 1030 g (2.28 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 508 Hazardous Location: UL/cUL Class 1 Division 2 EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: Signal: 10 V IEC 61000-4-8 Traffic Control: NEMA-TS2 Rail Traffic: EN 50121-4 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Note: Please check Moxa’s website for the most up-to-date certification status. MTBF (mean time between failures) Time: 710,166 hrs Standard: Telcordia (Bellcore), GB Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty