1-70 EDS-P506A-4PoE Series 1 Industrial Ethernet Switches Industrial Ethernet Switches > www. m oxa. com EDS-P506A-4PoE Series Introduction The EDS-P506A-4PoE series managed redundant Ethernet switches come standard with 4 10/100BaseT(X) 802.3at (PoE+) and 802.3af (PoE) compliant Ethernet ports and 2 10/100BaseT(X) or 2 10/100BaseFX Ethernet ports. The EDS-P506A-4PoE switches provide up to 30 watts of power per PoE port, and allow power to be supplied • Advanced PoE management function (PoE port setting, PD failure check, and PoE scheduling) • 24/48 VDC wide range redundant power inputs • IPv6 Ready logo awarded (IPv6 Logo Committee certified) • Command Line Interface (CLI) for quickly configuring major managed functions • Software-based IEEE 1588 PTPv2 (Precision Time Protocol) for precise time synchronization of networks Specifications 6-port managed Ethernet switches with 4 IEEE 802.3af/at PoE+ ports to connected high-power devices when AC power is not readily available or is cost-prohibitive to provide locally. The EDS-P506A-4PoE series is designed especially for security automation applications such as IP surveillance, and gate of entry systems, which can benefit from a scalable backbone construction and Power-over-Ethernet support. • Support EtherNet/IP and Modbus/TCP protocols for device management and monitoring • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy • IGMP snooping and GMRP for filtering multicast traffic • Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning • QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism • Port Trunking for optimum bandwidth utilization • TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security Features and Benefits Award-winning Product › ›4 IEEE 802.3af/at compliant PoE and Ethernet combo ports › ›Up to 30 watts per PoE port › ›24/48 VDC wide range redundant power inputs › ›Advanced PoE management functions, including PD failure check and PoE scheduling › ›Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy › ›-40 to 75°C operating temperature range (T models) › ›Supports MXstudio for easy, visualized industrial network management Technology Standards: IEEE 802.3af/at for Power-over-Ethernet IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP Software Features Management: IPv4/IPv6, SNMP v1/v2c/v3, LLDP, Port Mirror, DDM, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SMTP, RARP, Telnet, Syslog, SNMP Inform, Flow Control, Back Pressure Flow Control Filter: 802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2, GMRP Redundancy Protocols: STP, RSTP, MSTP, Turbo Ring v1/v2, Turbo Chain, Link Aggregation Security: RADIUS, TACACS+, SSL, SSH, Port Lock Time Management: SNTP, NTP Server/Client, IEEE 1588v2 PTP (software-based) Industrial Protocols: EtherNet/IP, Modbus/TCP MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 Switch Properties Priority Queues: 4 Max. Number of VLANs: 64 VLAN ID Range: VID 1 to 4094 IGMP Groups: 256 MAC Table Size: 8 K Packet Buffer Size: 1 Mbit Interface RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Ports: 100BaseFX ports (SC/ST connector) Console Port: RS-232 (RJ45 connector) PoE Pinout: V+, V+, V-, V- for pin 1, 2, 3, 6 (Endspan, MDI Alternative A) DIP Switches: Turbo Ring, Master, Coupler, Reserve Alarm Contact: 2 relay outputs with current carrying capacity of 1 A @ 24 VDC Digital Inputs: 2 inputs with the same ground, but electrically isolated from the electronics. • +13 to +30 V for state “1” • -30 to +3 V for state “0” • Max. input current: 8 mA