1-82 www. m oxa. com OBU-102 Series 1 Industrial Ethernet Switches Industrial Ethernet Switches > Moxa’s OBU-102 fiber optical bypass units add bypass relay functionality to any network node. In linear topologies, a single power outage or node failure can take out an entire chunk of the network, because communications to all the network nodes further down the line are also cut. With relay bypass, that node is instead simply bypassed in the event of a failure, and the rest of the network is unaffected. The OBU-102 sits between a node and the network to add bypass relay functionality to any network switches that do not already support this important function. In normal operations, the OBU-102 simply acts as a gateway that forwards network traffic to and from the network switch. However, if power is lost, the OBU-102 will bypass the unpowered switch and simply pass network traffic to the next switch in the relay. Introduction OBU-102 Series Specifications 2-channel optical fiber bypass units › ›Supports Fast, Gigabit, and 10 Gigabit Ethernet fiber connections in SC/ST/LC connectors › ›Redundant dual 12/24/48 VDC power inputs › ›IP30 metal housing › ›-20 to 70°C operating temperature range › ›DIN-rail mounting ability › ›Ultra low power consumption 0.72 W Bypass Properties Optical Switching Time: Max. 10 ms Insertion Loss: Max. 1.6 dB Interface Fiber Ports: 100M/1G/10G fiber in SC/ST/LC connector, single mode Rotary Switch: configure boot delay interval Power Requirements Input Voltage: 12/24/48 VDC, redundant dual inputs Operating Voltage: 9.6 to 60 VDC Overload Current Protection: 1100 mA @ 48 VDC Connection: 2 removable 2-contact terminal block Reverse Polarity Protection: Present Physical Characteristics Housing: Metal IP Rating: IP30 protection Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) Weight: 700 g (1.55 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: -20 to 70°C (-4 to 158°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 508 EMC: EN 55022 Class A EMI: CISPR 22, FCC Part 15B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 0.5 kV IEC 61000-4-6 CS: Signal: 10 V IEC 61000-4-8 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Note: Please check Moxa’s website for the most up-to-date certification status. Warranty Warranty Period: 2 years Details: See www.moxa.com/warranty