2-19 www.mo xa .c o m 2 Industry-Specific Ethernet Switches > TN-5510A-2GLSX-ODC Series Industrial Ethernet Introduction TN-5510A-2GLSX-ODC Series EN 50155 8+2G-port Q-ODC® managed Ethernet switches with up to 8 PoE ports The ToughNet TN-5510A-2GLSX-ODC and TN-5510A-8PoE-2GLSX- ODC series M12 managed Ethernet switches are designed for railway applications, such as rolling stock and wayside installations. The TN series switches use M12 and other circular connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the 24 to 110 VDC wide power input range and isolated power inputs not only allow you to use the same type of power source at different sites around the globe, but also increase the reliability of your communications system. The TN-5510A-2GLSX-ODC and TN-5510A- 8PoE-2GLSX-ODC switches provide up to 8 Fast Ethernet M12 ports, and 2 ports on the down side to provide the Gigabit fiber interface with an embedded 2 km multimode fiber transceiver. The TN-5510A-8PoE-2GLSX-ODC series Ethernet switches have 8 Fast Ethernet M12 ports with 8 IEEE 802.3at/af compliant PoE (Power-over-Ethernet) ports. The PoE switches are classified as power source equipment (PSE); they provide up to 30 watts of power per port, and can be used to power IEEE 802.3at/af compliant powered devices (PDs), such as IP cameras, wireless access points, and IP phones. Moreover, the -40 to 75°C operating temperature and IP54- rated waterproof and dustproof enclosure allow deployment in harsh environments. The TN-5500A series Ethernet switches are compliant with essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD, and vibration, as well as conformal coating and power insulation, making the switches suitable for a variety of industrial applications. • Provides up to 30 watts per PoE port with a total power budget of 120 watts per switch • IPv6 Ready logo awarded (IPv6 Logo Committee certified) • Leading EN 50155-compliant Gigabit Ethernet switches for rolling stock applications • DHCP Option 82 for IP address assignment with different policies • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy • IGMP snooping and GMRP for filtering multicast traffic • EtherNet/IP and Modbus/TCP industrial Ethernet protocols supported • Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning • QoS (IEEE 802.1p/1Q and ToS/DiffServ) allows real-time traffic classification and prioritization • IEEE 802.3ad, LACP for optimum bandwidth utilization • SNMPv1/v2c/v3 for different levels of network management • TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security • RMON for efficient network monitoring and proactive capability • Bandwidth management prevents unpredictable network status • Lock port allows access by only authorized MAC addresses • Port mirroring for online debugging • Automatic warning by exception through email, relay output • Line-swap fast recovery • LLDP for automatic topology discovery in network management software • Configurable by web browser, Telnet/serial console, CLI, and Windows utility • Loop protection prevents network loops • Panel mounting or DIN-rail mounting installation capability Features and Benefits › ›2 Gigabit fiber ports with embedded multi-mode Q-ODC® interface › ›Isolated power inputs with wide 24 to 110 VDC power supply range › ›Essential compliance with EN 50155* › ›-40 to 75°C operating temperature range › ›Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy › ›8 IEEE 802.3at/af compliant combo PoE and Ethernet ports › ›Provides up to 30 watts per PoE port *Moxa defines “essential compliance” to include those EN 50155 requirements that make products more suitable for rolling stock railway applications.