2-35 www.mo xa .c o m Industrial Ethernet 2 Industry-Specific Ethernet Switches > PT-7528 Series Specifications Technology Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP Software Features Management: IPv4/IPv6, SNMPv1/v2c/v3, DHCP Server/ Client, BootP, TFTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, DHCP Option 66/67/82, LLDP, Flow Control, Back Pressure, SNMP Inform, Port Mirror, Fiber Check, Syslog Filter: IGMPv1/v2, GMRP, GVRP, 802.1Q VLAN, VLAN Unaware, Port-Based VLAN, GVRP Redundancy Protocols: STP/RSTP, MSTP, Turbo Ring v1/v2, Turbo Chain, Link Aggregation Security: RADIUS, TACACS+, SSL, SSH, Port Lock, Broadcast Storm Protection, Rate Limit Time Management: SNTP, NTP Server/Client, IEEE 1588v2 PTP (software-based) Industrial Protocols: EtherNet/IP, Modbus/TCP MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 Power Substation: MMS, IEC 61850 QoS, Configuration Wizard Switch Properties Priority Queues: 4 Max. Number of VLANs: 256 VLAN ID Range: VID 1 to 4094 IGMP Groups: 256 Jumbo Frame Size: 9728 bytes Interface RJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed Fiber Ports: 100/1000BaseSFP slot, 100BaseFX Multi-mode ST/SC Connector Console Port: USB console port (Type B connector) Storage Port: USB storage port (Type A connector) Alarm Contact: 1 relay output with current carrying capacity of 3 A @ 30 VDC or 3 A @ 240 VAC Optical Fiber 100BaseFX Multi-mode Single-mode Single-mode, 80 km Wavelength 1300 nm 1310 nm 1550 nm Max. TX -10 dBm 0 dBm 0 dBm Min. TX -20 dBm -5 dBm -5 dBm RX Sensitivity -32 dBm -34 dBm 34 dBm Link Budget 12 dB 29 dB 29 dB Typical Distance 5 kma 4 kmb 40 kmc 80 kmd Saturation -6 dBm -3 dBm -3 dBm a. 50/125 μm, 800 MHz*km fiber optic cable b. 62.5/125 μm, 500 MHz*km fiber optic cable c. 9/125 μm single-mode fiber optic cable d. 9/125 μm single-mode fiber optic cable (80 km) Power Requirements Input Voltage: • WV: 24/48 VDC • HV: 110/220 VDC/VAC Operating Voltage: • WV: 18 to 72 V • HV: 88 to 300 VDC and 85 to 264 VAC Input Current: For models with fewer than 8 fiber ports: • Max. 0.741 A @ 24 VDC • Max. 0.364 A @ 48 VDC • Max. 0.147/0.077 A @ 110/220 VDC • Max. 0.283/0.19 A @ 110/220 VAC For models with 8 or more fiber ports: • Max. 1.428 A @ 24 VDC • Max. 0.735 A @ 48 VDC • Max. 0.313/0.167 A @ 110/220 VDC • Max. 0.586/0.382 A @ 110/220 VAC Overload Current Protection: Present Connection: 10-pin terminal block Reverse Polarity Protection: Present Physical Characteristics Housing: Aluminum alloy IP Rating: IP40 protection Dimensions: 440 x 44 x 325 mm (17.32 x 1.73 x 12.80 in) Weight: 4900 g (10.89 lb) Installation: 19-inch rack mounting Environmental Limits Operating Temperature: -40 to 85°C (-40 to 185°F), cold start requires min. of 100 VAC at -40°C Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 508 EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 IEC 61000-4-11 Rail Traffic: EN 50121-4 Transportation: NEMA TS2 Electrical Substation: IE C61850-3, IEEE 1613 Class 2 (models with MCS and SSC fiber ports are compliant with IEEE 1613 Class 1) MTBF (mean time between failures) Time: 422,912 hrs Standard: Telcordia TR/SR Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty