www.mo xa .c o m Industrial Wireless 6 Industrial Wireless LAN Solutions > AWK-5232 Series 6-17 Specifications AWK-5232 Series Industrial IEEE 802.11a/b/g/n dual-radio wireless AP/bridge/client The AWK-5232 industrial a/b/g/n wireless AP/bridge/client is an ideal wireless solution for hard-to-wire situations and all mobile equipment that is connected over a TCP/IP network. It provides a faster connection and wider range than 802.11g models, with the connection noticeably stronger at a distance. With two independent RF modules, the AWK-5232 allows two independent wireless connections over different frequencies, and supports a great variety of wireless configurations and applications. The AWK-5232 is compliant with the industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The AWK-5232’s two DC power inputs increases the power supply’s reliability, and can also be powered via PoE+ for easier deployment. Higher Data Rate and Greater Bandwidth • High-speed wireless connectivity with up to 300 Mbps data rate in each radio module • MIMO technology improves data throughput via mulitplexed, smart antenna transmissions and receptions • Channel bonding technology for increased throughput or channel redundancy • Dual DC power inputs and PoE+ • Immunity against disconnection caused by radio interference Specifications for Higher Security • 64-bit and 128-bit WEP (Wired Equivalent Privacy) • Enable/disable SSID broadcasts • Power filters for access control • IEEE/802.11X/RADIUS supported • WPA/WPA2/802.11i supported Introduction Dual RF Wireless Redundancy Dual RF Wireless Redundancy › ›IEEE 802.11a/b/g/n compliant › ›Dual-radio design for 2.4 GHz and/or 5 GHz bands › ›Redundant power inputs and PoE+ › ›Industrial grade QoS (WMM) and VLAN supported › ›Supports client-based Turbo Roaming › ›-40 to 75°C operating temperature range (T models) WLAN Interface Standards: IEEE 802.11a/b/g/n for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseTX IEEE 802.3ab for 1000BaseT IEEE 802.3at for Power-over-Ethernet Plus IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Spread Spectrum and Modulation (typical): • DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 1 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps • 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported) Operating Channels (central frequency): US: 2.412 to 2.462 GHz (11 channels) 5.18 to 5.24 GHz (4 channels) EU: 2.412 to 2.472 GHz (13 channels) 5.18 to 5.24 GHz (4 channels) JP: 2.412 to 2.472 GHz (13 channels, OFDM) 2.412 to 2.484 GHz (14 channels, DSSS) 5.18 to 5.24 GHz (4 channels for W52) Security: • SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES) Transmission Rates: 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5 to 300 Mbps (multiple rates supported) TX Transmit Power: 802.11b: Typ. 18±1.5 dBm @ 1 to 11 Mbps 802.11g: Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 17±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps 802.11n (2.4 GHz): Typ. 14±1.5 dBm @ MCS15 20 MHz 802.11a: Typ. 17±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 14±1.5 dBm @ 54 Mbps 802.11n (5 GHz): Typ. 13±1.5 dBm @ MCS15 20 MHz, Typ. 12±1.5 dBm @ MCS15 40 MHz