www.mo xa .c o m Industrial Wireless 6 Industrial Wireless LAN Solutions > AWK-6232 Series 6-19 › ›IEEE 802.11a/b/g/n compliant › ›Dual-radio design for 2.4 GHz and/or 5 GHz bands › ›M12 anti-vibration connectors › ›Industrial grade QoS (WMM) and VLAN supported › ›Supports client-based Turbo Roaming › ›Rugged IP68-rated housing and -40 to 75°C operating temperature AWK-6232 Series Outdoor industrial IEEE 802.11a/b/g/n dual-radio wireless AP/bridge/client Moxa’s AWK-6232 3-in-1 outdoor wireless AP/bridge/client meets the growing need for faster data transmission speeds and wider coverage by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps for each radio module. The AWK-6232 provides a flexible and efficient way to deploy your wireless network with its dual 2.4/5 GHz RF modules, which allow two independent wireless connections over different frequencies. The AWK-6232 is compliant with the industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. In addition, the AWK- 6232 is housed in an IP68 metal casing with M12 connectors for total protection against dust, water, vibration, and other environmental effects. Improved Higher Data Rate and Bandwidth • High-speed wireless connectivity with up to 300 Mbps data rate for each radio module • MIMO technology to improve the capacity of multiple data stream transmits and receives • Increased channel width with channel bonding technology Features for Critical Environments • IP68-rated metal housing and -40 to 75°C wide operating temperature • Anti-vibration M12 design and waterproof/dust-tight RJ45 connectors • Wall, DIN-rail, and pole-mounting options for versatile outdoor installation Introduction Specifications Dual RF Wireless Redundancy Dual RF Wireless Redundancy WLAN Interface Standards: IEEE 802.11a/b/g/n for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseTX IEEE 802.3ab for 1000BaseT IEEE 802.3at for Power-over-Ethernet Plus IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q VLAN Spread Spectrum and Modulation (typical): • DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 1 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps • 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported) Operating Channels (central frequency): US: 2.412 to 2.462 GHz (11 channels) 5.18 to 5.24 GHz (4 channels) EU: 2.412 to 2.472 GHz (13 channels) 5.18 to 5.24 GHz (4 channels) JP: 2.412 to 2.472 GHz (13 channels, OFDM) 2.412 to 2.484 GHz (14 channels, DSSS) 5.18 to 5.24 GHz (4 channels for W52) Security: • SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES) Transmission Rates: 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5 to 300 Mbps (multiple rates supported) TX Transmit Power: 802.11b: Typ. 18±1.5 dBm @ 1 to 11 Mbps 802.11g: Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 17±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps 802.11n (2.4 GHz): Typ. 14±1.5 dBm @ MCS15 20 MHz 802.11a: Typ. 17±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 14±1.5 dBm @ 54 Mbps 802.11n (5 GHz): Typ. 13±1.5 dBm @ MCS15 20 MHz, Typ. 12±1.5 dBm @ MCS15 40 MHz RX Receive Sensitivity: 802.11b: -92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps