10-14 www. m oxa. com NPort® S8000 Series Serial-to-Ethernet Device Servers Serial-to-Ethernet Device Servers > 10 Overview Supports the Full Range of NPort 5000 Series Device Server Functions Full-Function Managed Ethernet Switch Ring Redundancy at the Device Level NPort® S8000 Series The NPort S8000 series combines an industrial device server with a full-function managed Ethernet switch with 4 RS-232/422/485 serial ports, allowing you to easily install, manage, and maintain the product. Combining a device server and switch in one product allows you to The NPort S8000 series supports the complete array of NPort 5000 series device server functions. You can network your existing serial devices by connecting up to 4 serial devices through Ethernet ports, Device-level communication networks for industrial automation are very critical since they are used to control and monitor device processes. The reliability of these communications depends on ring redundancy at the device level. which is designed to provide fast network fault detection and reconfiguration in order to support the most demanding control applications. The NPort S8000 series integrates a full function NPort device server with an industrial switch The NPort S8000 series has a built-in full-function managed Ethernet switch that supports QoS, IGMP-snooping/GMRP, VLAN, Port Trunking, SNMPv1/v2c/v3, and IEEE 802.1X, allowing you to handle virtually any kind of application. Ethernet redundancy, which save space in your cabinet, reduce overall power consumption, and reduce costs, since you will not need to purchase a switch and serial device server separately. with only basic configuration required. In addition, data transmission between the serial and Ethernet interfaces is bi-directional. to carry serial and Ethernet devices at the same time. In addition, the NPort S8000 can also achieve ring redundancy with standard STP/ RSTP and Moxa’s proprietary Turbo Ring or Turbo Chain 2 redundancy protocols. This all-in-one design can be used to optimize and simplify your device network and enhance reliability. is used to increase the reliability and availability of your industrial Ethernet network, is provided by Moxa’s Turbo Ring and Turbo Chain technology (recovery time < 20 ms) or RSTP/STP (IEEE 802.1w/D). Combo switch / serial device servers › ›4-port RS-232/422/485 serial device server • Serial QoS for configuring serial data transmission priority • 2 kV (DC) isolation protection for each serial port (S8455I only) • Adjustable pull high/low resistor for RS-485 ports (S8455I only) › ›Built-in managed Ethernet switch • S8455I Fiber: Two fiber Ethernet ports and three Ethernet ports • S8455I All Copper: Five Ethernet ports • S8458: Four fiber Ethernet ports and four Ethernet ports › ›Ethernet redundancy with Turbo Ring and Turbo Chain (recovery time < 20 ms) or RSTP/STP (IEEE 802.1w/D) supported › ›QoS, IGMP-snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON supported › ›Surge protection for serial, power, and Ethernet NPort S8455I Fiber NPort S8455I NPort S8458