10-24 www. m oxa. com NPort® P5150A Series Serial-to-Ethernet Device Servers Serial-to-Ethernet Device Servers > 10 Easy to Troubleshoot Overview Surge-Protected Serial, Ethernet, and Power Lines 3-step Web-Based Configuration NPort® P5150A Series 1-port RS-232/422/485 PoE serial device servers NPort® P5150A device servers are designed to make serial devices network-ready in an instant. It is a PD device and is IEEE 802.3af compliant, so it can by powered by a PoE PSE device without an additional power supply. Use the NPort® P5150A device servers to The NPort® P5150A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort® P5150A’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step NPort® P5150A device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort® P5150A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the- give your PC software direct access to serial devices from anywhere on the network. The NPort® P5150A device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial-to- Ethernet solutions possible. web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort. e-mail alert can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a password change. art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions. › ›IEEE 802.3af-compliant PoE PD equipment › ›Speedy 3-step web-based configuration › ›Surge protection for serial, Ethernet, and power lines › ›COM port grouping and UDP multicast applications › ›Screw connectors for secure installation › ›Real COM/TTY drivers for Windows and Linux › ›Standard TCP/IP interface and versatile TCP and UDP operation modes Appearance NPort® P5150A DK35A DIN-Rail Kit Available Accessory RS-232/422/485 Power input Screw power jack 12 to 48 VDC Reset button Ethernet RJ45 PoE 10/100 Mbps Power over Ethernet