10-25 www.mo xa .c o m NPort® P5150A Series Serial-to-Ethernet Device Servers > 10 Serial Connectivity Specifications Ethernet Interface Number of Ports: 1 Speed: 10/100 Mbps, auto MDI/MDIX Connector: 8-pin RJ45 Magnetic Isolation Protection: 1.5 kV built-in Serial Interface Number of Ports: 1 Serial Standards: RS-232/422/485 Connector: DB9 male Serial Line Protection: Level 2 Surge, EN61000-4-5 RS-485 Data Direction Control: ADDC® (Automatic Data Direction Control) Pull High/Low Resistor for RS-485: 1 kΩ, 150 kΩ Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF Baudrate: 50 bps to 921.6 kbps Serial Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND RS-485-2w: Data+, Data-, GND Software Network Protocols: ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, ARP Configuration Options: Web Console (with new Quick Setup), Serial Console, Telnet Console, Windows Utility Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.x Physical Characteristics Housing: Metal Weight: 300 g (0.66 lb) Dimensions: Without ears: 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in) With ears: 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in) Environmental Limits Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 75°C (-40 to 167°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Power Requirements Input Voltage: 12 to 48 VDC (supplied by power adapter) or 48 VDC (supplied by PoE) Input Current: DC Jack I/P: 125 mA @ 12 VDC PoE I/P: 180 mA @ 48 VDC Standards and Certifications Safety: UL 60950-1 EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class A EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs Reliability Automatic Reboot Trigger: Built-in WDT (watchdog timer) MTBF (mean time between failures) Time: 2,231,530 hrs Standard: Telcordia (Bellcore) Standard TR/SR Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Ordering Information Package Checklist • 1 NPort P5150A device server • 4 stick-on pads • Documentation and software CD • Quick installation guide (printed) • Warranty card Pin Assignment PIN RS-232 RS-422/485-4w RS-485-2w 1 DCD TxD-(A) – 2 RxD TxD+(B) – 3 TxD RxD+(B) Data+(B) 4 DTR RxD-(A) Data-(A) 5 GND GND GND 6 DSR – – 7 RTS – – 8 CTS – – DB9 male connector NPort® P5150A (RS-232/422/485) 1 2 3 4 5 6 7 8 9 Dimensions Unit: mm (inch) 111 (4.37) 100 (3.94) 77 (3.03) 26 (1.02) 88 (3.46) 5.5 (0.22) 43 (1.69) 25 (0.98) 115.5 (4.55) Available Models NPort P5150A: 1-port RS-232/422/485 PoE device server, 0 to 60°C operating temperature NPort P5150A-T: 1-port RS-232/422/485 PoE device server, -40 to 75°C operating temperature Optional Accessories (can be purchased separately) DK35A: DIN-rail mounting clips, 35 mm, 2 DIN-rail plates with 4 screws Mini DB9F-to-TB: DB9 female to terminal block adapter for RS-422/485 applications Note: Additional power adapters can be purchased separately. Please refer to the Power Accessory Selection Guide for details.