10-54 www. m oxa. com NPort® Z2150/Z3150 Series Serial-to-Ethernet Device Servers Serial-to-Ethernet Device Servers > 10 NPort® Z2150/Z3150 Series 1-port RS-232/422/485 to ZigBee converter or ZigBee-to-Ethernet gateway › ›IEEE 802.15.4/ZigBee compliant › ›Network topologies: Mesh/Star/Cluster tree › ›128-bit AES hardware encryption › ›Enhanced surge protection for serial and power › ›Dual DC power inputs (NPort Z3150 only) › ›Easy-to-use configuration utility The NPort Z2150 and NPort Z3150 are IEEE 802.15.4/ZigBee compliant, providing a reliable wireless solution for serial-to-ZigBee networks requiring minimal wiring presence. The NPort Z2150 can be configured as a ZigBee coordinator (ZC), a ZigBee router (ZR), or a ZigBee end device (ZED). Any serial device can be connected to the NPort Z2150 and exchange data via PAN. An user- friendly utility is provided to configure the device type and network settings in simple steps. The NPort Z3150 was designed specifically to perform as a ZigBee Coordinator (ZC), providing nodes with an Ethernet interface to the ZigBee PAN. Internet connection ad network services are also provided via the ZigBee PAN. Remote users can monitor any ZigBee device in the PAN through the NPort Z3150. Overview The following figure shows a typical topology of a ZigBee network. The NPort Z3150 is the ZigBee coordinator (ZC) connected to numerous ZigBee routers (ZR) and the routers are connected to end devices(ZED). Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort Z2150/Z3150’s serial and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This surge protection provides a robust solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions. Surge-Protected Serial and Power Lines Specifications ZigBee Interface RF Standard: 802.15.4/ZigBee compliant Frequency Band: 2.4 GHz RF Data Rate: 250 kbps Rx sensitivity: -96 dBm Tx Power: 4.5 dBm (Max) Transmission Distance: Up tp 100 m (open space) Antenna: 2 dBi RF Channel: 16 channels Device Type: Coordinator, Router (NPort Z2150 only), End Device (NPort Z2150 only) Network Topology: Star, Mesh, Cluster tree Security: 128-bit AES encryption algorithms Ethernet Interface (NPort Z3150 only) Number of Ports: 1 Speed: 10/100 Mbps, auto MDI/MDIX Connector: RJ45 Magnetic Isolation Protection: 1.5 kV built-in Hardware DIP Switch: Console/Operation Mode SW1: Pull high/low resister, Termination for RS-422/485. Reset Button: Reset to default Serial Interface Number of Ports: 1 Serial Standards: RS-232/422/485 Connector: DB9 male Serial Line Protection: 1 kV surge protection RS-485 Data Direction Control: ADDC (Automatic Data Direction Control) Serial Communication Parameters Data Bits: NPort Z2150: 8 NPort Z3150: 5, 6, 7, 8 Stop Bits: 1, 2 NPort Z3150 NPort Z2150