11-6 www. m oxa. com Embedded Device Servers > Embedded Device Servers 11 MiiNePort E2 Series MiiNePort E2 Series The MiiNe was created to provide manufacturers with a competitive embedded serial-to-Ethernet solution. The MiiNePort E2, which uses the MiiNe for its SoC, is one of the world’s tiniest embedded device servers and has the lowest power consumption among similar products. The MiiNe’s features include: • Cost-effective serial-to-Ethernet conversions • ARM core • Advanced UART technology • Internal 2 MB Flash and 4 MB SDRAM memory 10/100 Mbps embedded serial device servers Moxa’s MiiNePort E2 series embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E2 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet, delivers a serial baudrate of up to 921.6 kbps, offers a versatile selection of ready-to-use operation modes, and requires a minimal amount of power. With Moxa’s innovative NetEZ technology, the MiiNePort E2 can convert any device with a standard serial interface to an Ethernet-enabled device. In addition, the MiiNePort E2 is the smallest embedded device server without an RJ45 connector, making it easy to fit into virtually any existing serial device. MOXA MiiNe (196-pin CPU) Ethernet Signals GPIO I2 C Timer MAC Ethernet SDRAM (4 MB) FLASH (2 MB) POWER System Watchdog Timer PHY UART SPI 8-pin Connector Overview The MiiNe—Moxa’s 2nd Generation SoC Specifications Award-winning Product › ›Smallest embedded device server available—only 29 x 17 x 12.6 mm › ›EZPower for 3.3 to 5 VDC system power input supported › ›Extremely low power consumption › ›Uses the MiiNe, Moxa’s second generation SoC › ›Simple integration with NetEZ technology › ›Operation versatility with Real COM/TCP/UDP/RFC2217/MCSC Form Factor Type: Drop-in module Dimensions: 29 x 17 x 12.6 mm (1.14 x 0.67 x 0.50 in) Weight: 5 g (0.01 lb) System Information CPU: 32-bit ARM Core RAM: 4 MB built in Flash: 2 MB built in Ethernet Interface Number of Ports: 1 Speed: 10/100 Mbps, auto MDI/MDIX Magnetic Isolation Protection: 1.5 kV built-in Serial Interface Number of Ports: 1 Transmission Format: Standard TTL Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS, DTR/DSR, XON/XOFF Baudrate: MiiNePort E2: 50 bps to 230.4 kbps MiiNePort E2-H: 50 bps to 921.6 kbps Note: Non-standard baudrates supported Serial Signals TTL: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RST (reset circuit), GND Digital I/O Pins GPIO: 4 configurable I/O pins