11-10 www. m oxa. com Embedded Device Servers > Embedded Device Servers 11 MiiNePort E2-SDK Hardware Evaluation Board Number Description 1 MiiNePort E2-SDK Module, 2 MB Flash and 4 MB RAM built in 2 10/100M Ethernet RJ45 Connector 3 Serial Interface Jumper 4 Power Switch 5 Power Jack, 12 to 48 VDC 6 Power & Ready LED 7 RS-232 DB9 Male Connector 8 Serial Port Status LED 9 Digital IO Terminal Block 10 Digital Output LED 11 Digital Input/Output Mode 12 Digital Input Switch 13 Circuit Pad 14 USB Type B Connector (Debug) 10 8 9 7 6 5 4 1 14 13 12 11 2 3 Ordering Information Available Modules MiiNePort E2-SDK: Software development kit for the MiiNePort E2 Series, MiiNePort E2 module included Note: For a list of applicable modules available for order, please refer to the MiiNePort E2 datasheet. Optional Accessories (can be purchased separately) PWR-12125-DT-S1: Desktop power supply (requires power cord), 12 VDC, 1.25 A, 100 to 240 VAC PWC-C7US-2B-183: 10A/125V US power cord, 183 cm PWC-C7EU-2B-183: 2.5A/250V Continental European (EU) power cord, 183 cm CBL-F9M9-150: DB9 female to DB9 male serial cable, 150 cm CBL-RJ458P-100: 8-pin RJ45 CAT5 Ethernet cable, 100 cm CBL-USBA/B-100: USB Type A to USB Type B cable, 100 cm Package Checklist • MiiNePort E2-SDK module • MiiNePort E2-SDK evaluation board • Universal power adapter • Power Cord: PWC-C7US-2B-183 • Power Cord: PWC-C7EU-2B-183 • USB Cable: CBL-USBA/B-100 • Serial Cable: CBL-F9M9-150 • Ethernet Cable: CBL-RJ458P-100 • Documentation and software CD • Quick installation guide (printed) • Warranty card Serial Interface Number of Ports: 1 Transmission Format: Standard TTL Digital I/O Pins GPIO: 4 configurable I/O pins Software OS: eCos Software Development Tool: MiiNePort-IDE Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.x Operation Modes: Real COM, Ethernet Modem Wizard: Project/SNMP/CLI(Telnet)/SCM/User Configuration Serial/Ethernet Test Tool: PComm Lite (Serial/TCP Server/TCP Client) Search/Upload Firmware Utility: NPort Search Utility Serial to Ethernet Sample Source Code (Integrated in MiiNePort-IDE): 1. TCP Server Echo 2. TCP Server to Serial (Single connection) 3. TCP Server to Serial (Multi-connection) 4. TCP Client Echo 5. TCP Client to Serial (Startup) 6. TCP Client to Serial (Any character) 7. TCP Client to Serial (Designed destination TCP/IP port from serial) 8. UDP echo 9. UDP to serial Environmental Limits Operating Temperature: Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) Storage Temperature (package included): -40 to 60°C (-40 to 140°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Power Requirements Input Voltage: 3.3 to 5 VDC Input Current: 140 mA @ 3.3 VDC Standards and Certifications EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class B EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV IEC 61000-4-5 Surge: Power 2 kV; Signal: 0.5 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 Drop: IEC 60068-2-34 IEC 60068-2-32, ISTA-2A Reliability MTBF (mean time between failures): Time: 2,463,960 hrs Standard: Telcordia (Bellcore) TR/SR Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty