11-13 www.mo xa .c o m Embedded Device Servers > 11 MiiNePort E3 Series Serial Connectivity Ethernet Pins (JP2) Serial Pins and Power Pins (JP4) Pin Signal Name Function Pin Signal Name Function Pin Signal Name Function 1 Reserve N/A 1 Serial Rx Receive Serial Data 11 DTR Data Terminal Ready 2 Reserve N/A 2 Ready LED System To Ready LED 12 Reserve N/A 3 Reserve N/A 3 Serial Tx Transmit Serial Data 13 LDSR Data Set Ready 4 Reserve N/A 4 GPIO Programmable I/O 14 Reserve N/A 5 POE signal pair 1 PoE Power from Tx signal 5 LDCD Data Carrier Detect 15 LCTS Clear To Send 6 POE spare pair 1 PoE Power from RJ45 4, 5 pin 6 GPIO Programmable I/O 16 SW_Reset Reset to factory default 7 POE signal pair 2 PoE Power from Rx signal 7 RS485_ EN0 RS-485 Enable 17 Reserve N/A 8 POE spare pair 2 PoE Power from RJ45 7, 8 pin 8 GPIO Programmable I/O 18 Reserve N/A 9 LRTS Request To Send 19 GND Circuit Ground 10 GPIO Programmable I/O 20 VCC Power Supply Pin Assignment Ordering Information Available Modules MiiNePort E3: Embedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 230.4 kbps baudrate, 0 to 55°C operating temperature MiiNePort E3-H: Embedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 921.6 kbps baudrate, 0 to 55°C operating temperature MiiNePort E3-T: Embedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 230.4 kbps baudrate, -40 to 85°C operating temperature MiiNePort E3-H-T: Embedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 921.6 kbps baudrate, -40 to 85°C operating temperature Available Starter Kits MiiNePort E3-ST: Starter kit for the MiiNePort E3 Series, module included MiiNePort E3-H-ST: Starter kit for the MiiNePort E3-H Series, module included Optional Accessories (can be purchased separately) PWR-12125-DT-S1: Desktop power supply (requires power cord), 12 VDC, 1.25 A, 100 to 240 VAC PWC-C7US-2B-183: 10A/125V US power cord, 183 cm PWC-C7EU-2B-183: 2.5A/250V Continental European (EU) power cord, 183 cm CBL-F9M9-150: DB9 female to DB9 male serial cable, 150 cm CBL-RJ458P-100: 8-pin RJ45 CAT5 Ethernet cable, 100 cm Assembly Pack: 8 screws and 4 spacers 8-pin Straight Cable: For connecting module and evaluation board 20-pin Straight Cable: For connecting module and evaluation board Package Checklist (modules) • MiiNePort E3 module Package Checklist (starter kits) • MiiNePort E3 module • MiiNePort E3 evaluation board • Universal power adapter • Power Cord: PWC-C7US-2B-183 • Power Cord: PWC-C7EU-2B-183 • Serial Cable: CBL-F9M9-150 • Ethernet Cable: CBL-RJ458P-100 • Assembly pack (8 screws & 4 spacers) • 8-pin straight cable (connect module and evaluation board) • 20-pin straight cable (connect module and evaluation board) • Documentation and software CD • Quick installation guide (printed) • Warranty card