8-port 3-in-1, RS-422/485 PCI Express board with 4 kV surge protection and 2 kV electrical isolation CP-118E-A-I/138E-A-I The CP-118E-A-I and CP-138E-A-I are smart PCI Express multiport serial boards designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-118E-A-I and CP-138E-A-I are compatible with all popular operating systems, and each of their 8 serial ports supports data rates of up to 921.6 kbps and provide full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-118E-A-I and CP-138E-A-I work with PCI Express x1, allowing the boards to be installed in any PCI Express slot. Specifications Overview the network. Moxa’s new Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable. Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along CP-118E-A-I CP-138E-A-I Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending) › ›PCI Express x1 compliant › ›Serial communication speed up to 921.6 kbps › ›128-byte FIFO and on-chip S/W flow control › ›Variety of connection cables and boxes available for RS- 232/422/485 › ›Drivers provided for the latest versions of Windows, Linux, and Unix › ›Easy maintenance with on-board LED display and management software Hardware Comm. Controller: 16C550C compatible Bus: PCI Express x1 Connector: DB78 female Serial Interface Number of Ports: 8 Serial Standards: CP-118E-A-I: RS-232/422/485 CP-138E-A-I: RS-422/485 Max. No. of Boards per PC: 4 Serial Line Protection Surge Protection: 4 kV Electrical Isolation: 2 kV Performance Baudrate: 50 bps to 921.6 kbps Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS, XON/XOFF Serial Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND RS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND RS-485-2w: Data+(B), Data-(A), GND Physical Characteristics Dimensions: 109.5 x 130 mm (4.31 x 5.11 in) Driver Support Windows: Windows 2000/XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64) Linux: Linux 2.4.x, 2.6.x, 3.x Unix-like Systems: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64) Note: Please refer to Moxa’s website for the latest driver support information. Environmental Limits Operating Temperature: 0 to 55°C (32 to 131°F) Storage Temperature: -20 to 85°C (-4 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) 12-18 www. m oxa. com Multiport Serial Boards > CP-118E-A-I/138E-A-I Multiport Serial Boards 12