CP-114EL/EL-I 4-port RS-232/422/485 PCI Express boards with optional 2 kV isolation The CP-114EL and CP-114EL-I are smart, 4-port PCI Express boards designed for POS and ATM applications. The boards are a top choice of industrial automation engineers and system integrators, and support many different operating systems, including Windows and Linux. In The CP-114EL and CP-114EL-I are low profile boards that are compatible with any PCI Express slot. The boards require only a 3.3 Moxa continues to support a wide variety of operating systems, and the CP-114EL/EL-I boards are no exception. Reliable Windows and addition, each of the boards’ 4 RS-232/422/485 serial ports supports a super fast 921.6 kbps baudrate. The CP-114EL and CP-114EL-I provide full modem control signals to ensure compatibility with a wide range of serial peripherals, and their PCI Express “x1” classification allows the boards to be installed in any PCI Express slot. VDC power supply, which means that the boards fit any host computer, ranging from shoebox to standard-sized PCs. Linux drivers are provided for all Moxa boards, and other operating systems, such as WEPOS, are also supported for embedded integration. CP-114EL CP-114EL-I › ›PCI Express x1 compliant › ›921.6 kbps maximum baudrate for super fast data transmission › ›128-byte FIFO and on-chip H/W, S/W flow control › ›Low profile form factor fits small-sized PCs › ›Drivers provided for a broad selection of operating systems, including the latest Windows and Linux Hardware Comm. Controller: 16C550C compatible Bus: PCI Express x1 Connector: DB44 female Serial Interface Number of Ports: 4 Serial Standards: RS-232/422/485 Max. No. of Boards per PC: 4 Serial Line Protection Electrical Isolation: 2 kV (CP-114EL-I only) Performance Baudrate: 50 bps to 921.6 kbps Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS, XON/XOFF Serial Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND RS-485-4w: TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND RS-485-2w: Data+(B), Data-(A), GND Physical Characteristics Dimensions: CP-114EL: 67.21 x 103 mm (2.65 x 4.06 in) CP-114EL-I: 67.21 x 135 mm (2.65 x 5.31 in) Driver Support Windows: Windows 95/98/ME/NT/2000, Windows XP/2003/ Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), DOS Linux: Linux 2.4.x, 2.6.x, 3.x Unix-like Systems: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 Note: Please refer to Moxa’s website for the latest driver support information. Environmental Limits Operating Temperature: 0 to 55°C (32 to 131°F) Storage Temperature: -20 to 85°C (-4 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class B EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV Specifications Overview Smaller Form Factor Drivers Provided for Windows, Linux, and Unix 12-22 www. m oxa. com Multiport Serial Boards > CP-114EL/EL-I Multiport Serial Boards 12