1-32 www. m oxa. com EDS-608/611/616/619 Series 1 Industrial Ethernet Switches Industrial Ethernet Switches > 157.2 (6.2) 124.9 (4.9) 50.0 (2.0) 151.0 (5.9) 157.2 (6.2) 72.0 (2.8) 120.0 (4.7) 167.2 (6.6) Side View Front View Rear View Side View EDS-608/611 Series DIN-Rail Mounting Kit Top View Dimensions Unit: mm (inch) Switch Properties Priority Queues: 4 Max. Number of VLANs: 64 VLAN ID Range: VID 1 to 4094 IGMP Groups: 256 MAC Table Size: 8 K Packet Buffer Size: 1 Mbit Interface Fast Ethernet: 2 or 4 slots for any combination of 4-port interface modules, 10/100BaseT(X) or 100BaseFX Gigabit Ethernet: 3 10/100/1000BaseT(X) with 100/1000BaseSFP combo slots (EDS-611 and EDS-619 only) Console Port: RS-232 (RJ45 connector) DIP Switches: Turbo Ring, Master, Coupler, Reserve System LED Indicators: PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/ TAIL, G1/G2/G3 (EDS-611 and EDS-619 only) Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC Digital Inputs: 1 input with the same ground, but electrically isolated from the electronics. • +13 to +30 V for state “1” • -30 to +3 V for state “0” • Max. input current: 8 mA Power Requirements Input Voltage: 12/24/48 VDC, redundant dual inputs Input Current: (without CM-600 modules installed) EDS-608: 0.16 A @ 24 V EDS-611: 0.31 A @ 24 V EDS-616: 0.25 A @ 24 V EDS-619: 0.31 A @ 24 V Overload Current Protection: Present Connection: 1 removable 5-contact and 1 removable 6-contact terminal block Reverse Polarity Protection: Present Physical Characteristics IP Rating: IP30 protection Dimensions: EDS-608/611 Series: 124.9 x 151 x 157.2 mm (4.92 x 5.95 x 6.19 in) EDS-616/619 Series: 185 x 151 x 157.2 mm (7.28 x 5.95 x 6.19 in) Weight: EDS-608: 2080 g (4.59 lb) EDS-611: 2260 g (4.99 lb) EDS-616: 2780 g (6.13 lb) EDS-619: 2950 g (6.51 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 508, UL 60950-1, EN 60950-1 Hazardous Location: UL/cUL Class 1 Division 2 Groups A/B/C/D, ATEX Zone 2 Ex nA nC IIC T4 Gc EMC: EN 55022/24, EN 61000-6-2/6-4 EMI: CISPR 22, FCC Part 15B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: Signal: 10 V IEC 61000-4-8 Traffic Control: NEMA TS2 Rail Traffic: EN 50121-4 Marine: DNV, GL, LR, ABS, NK Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Note: Please check Moxa’s website for the most up-to-date certification status. MTBF (mean time between failures) Time: EDS-608: 596,219 hrs EDS-611: 483,344 hrs EDS-616: 546,937 hrs EDS-619: 475,816 hrs Standard: Telcordia (Bellcore), GB Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty