Device Connectivity 14-19 www.mo xa .c o m Device Connectivity Serial Media Converters > TCC-100/100I Series 14 Introduction Specifications TCC-100/100I Series Industrial RS-232 to RS-422/485 converters with optional 2 kV isolation The TCC-100/100I series RS-232 to RS-422/485 converters increase networking capability by extending the RS-232 transmission distance. Both converters have a superior industrial-grade design that includes DIN-rail mounting, terminal block wiring, an external terminal block for power, and optical isolation (TCC-100I and TCC-100I-T only). The TCC- 100/100I series converters are ideal solutions for converting RS-232 signals to RS-422/485 in critical industrial environments. Ordering Information › ›RS-232 to RS-422 conversion with RTS/CTS support › ›RS-232 to 2-wire or 4-wire RS-485 conversion › ›2 kV isolation protection (TCC-100I) › ›Wall- and DIN-rail mounting › ›Plug-in terminal block for easy RS-422/485 wiring › ›LED indicators for power, Tx, Rx › ›Wide temperature range model available (-40 to 85°C) Available Models TCC-100: RS-232 to RS-422/485 converter, -20 to 60°C operating temperature TCC-100I: RS-232 to RS-422/485 converter with optical isolation, -20 to 60°C operating temperature TCC-100-T: RS-232 to RS-422/485 converter, -40 to 85°C operating temperature TCC-100I-T: RS-232 to RS-422/485 converter with optical isolation, -40 to 85°C operating temperature RS-232 Side Connector: DB9 female Signals: TxD, RxD, RTS, CTS, GND RS-422/485 Side Connector: Terminal Block Signals: (interface selected by DIP switch) RS-422: TxD+, TxD-, RxD+, RxD-, RTS, CTS, GND RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND RS-485-2w: Data+, Data-, GND RS-485 Data Direction Control: ADDC® (Automatic Data Direction Control) Serial Communication Baudrate: 50 bps to 921.6 kbps Optical Isolation: 2 kV (TCC-100I/100I-T) Physical Characteristics Housing: Metal Dimensions: 67 x 100.4 x 22 mm (2.64 x 3.93 x 0.87 in) Weight: 148 g (0.33 lb) Environmental Limits Operating Temperature: Standard Models: -20 to 60°C (-4 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Power Requirements Source of Input Power: Power input jack Input Voltage: 12 to 48 VDC Input Current: TCC-100/100-T: 85 mA @ 12 VDC TCC-100I/100I-T: 150 mA @ 12 VDC Voltage Reversal Protection: Protects against V+/V- reversal Overcurrent Protection: Protects against two signals shorted together Standards and Certifications Safety: UL 60950-1 EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class B EMS: EN 61000-4-2 (ESD): Contact: 4 kV; Air: 8 kV EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m EN 61000-4-4 (EFT): Power: 1 kV; Signal: 0.5 kV EN 61000-4-5 (Surge): Power: 1 kV EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m EN 61000-4-8 (PFMF) Green Product: RoHS, CRoHS, WEEE MTBF (mean time between failures) Time: 3,017,857 hrs Standard: MIL-HDBK-217F Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Dimensions Unit: mm (inch) Package Checklist • 1 TCC-100/100I media converter • Power wiring: CBL-PJTB-10 • Mounting kit: DK35A • Quick installation guide (printed) • Warranty card • Rubber pad Ø4 (Ø0.16) 90 (3.54) 100.4 (3.95) 11.5 (0.45) 28.7 (1.13) 67 (2.64) 43 (1.69) Ø 7 ( Ø 0 . 2 8 ) 22 (0.87) 5 (0.20) 7 (0.28) 78 (3.07)