16-3 www.mo xa .c o m Smart Remote I/O > Product Selection Guide Remote Automation 16 Smart Remote I/O with Click&Go Logic ioLogik E2210 ioLogik E2212 ioLogik E2214 ioLogik E2240 ioLogik E2242 ioLogik E2260 ioLogik E2262 ioLogik W5340-HSPA Inputs/Outputs Digital Inputs 12 8 6 – – – – – Digital Outputs 8 8 – – – 4 4 – Relays – – 6 – – – – 2 Configurable DIOs – 4 – – 12 – – 8 Analog Inputs – – – 8 4 – – 4 Analog Outputs – – – 2 – – – – RTDs – – – – – 6 – – Thermocouples – – – – – – 8 – Ethernet Ports (Connector) 1 (RJ45) 1, with up to 3 ioLogik E1200 units daisy-chained (RJ45) Speed 10/100 Mbps Protocols Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, SNMP, SNTP, SMTP Serial Ports (Connector) 1 (Euroblock terminal) 1 (DB9 male or Euroblock terminal) Interface RS-485 RS-232/422/485 software-selectable Protocols Modbus/RTU (gateway) Modbus/RTU (master/gateway), serial tunnel mode (client/server) Environmental Limits Standard Operating Temp. -10 to 60°C (14 to 140°F) -10 to 55°C (14 to 131°F) Wide Operating Temp. -40 to 75°C (-40 to 167°F) -30 to 70°C (-22 to 158°F) Storage Temperature -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% RH (non-condensing) Software Click&Go P P P P P P P P Active OPC Server P P P P P P P P MX-AOPC UA Server P P P P P P P P DA-Center (Data Complement) – – – – – – – P MXIO P P P P P P P P ioAdmin P P P P P P P P Standards and Certifications Safety UL 508 EMC EN 61000-6-2; EN 61000-6-4 EMI CISPR 22, FCC Part 15B Class A EMS EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-8 Shock IEC 60068-2-27 Vibration IEC 60068-2-6 Radio – – – – – – – R&TTE; NCC Green Product RoHS, CRoHS, WEEE Reliability Warranty 5 years 5 years 2 years* 5 years 5 years 5 years 5 years 2 years* Page 16-18 16-18 16-18 16-18 16-18 16-18 16-18 16-9 *Because of the limited lifetime of power relays, products using that component are covered by a 2-year warranty.