16-6 www. m oxa. com Smart Remote I/O > ioLogik 2500 HSPA/GPRS/WLAN Series Smart Remote I/O 16 ioLogik 2542 Specifications Inputs and Outputs Configurable DIOs (by software): 12 channels Analog Inputs: 4 channels Isolation: 3k VDC or 2k Vrms Digital Input Sensor Type: Wet Contact (NPN or PNP) and Dry Contact I/O Mode: DI or Event Counter Dry Contact: • On: short to GND • Off: open Wet Contact (DI to COM): • On: 10 to 30 VDC • Off: 0 to 3 VDC Common Type: 6 points per COM Counter Frequency: 2.5 kHz Digital Filtering Time Interval: Software configurable Digital Output Type: Sink I/O Mode: DO or Pulse Output Pulse Output Frequency: 5 kHz Over-Voltage Protection: 45 VDC Over-Current Protection: 1.5 A per channel @ 25°C Over-Temperature Shutdown: 175°C (min.) Current Rating: 500 mA per channel @ 25°C DIO Output Leakage Current: < 1 mA @ 30 VDC Analog Input Type: Differential input Resolution: 16 bits I/O Mode: Voltage / Current (software selectable) Input Range: ±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection) Accuracy: • ±0.1% FSR @ 25°C • ±0.3% FSR @ -10 and 60°C • ±0.5% FSR @ -30 and 70°C Sampling Rate: • All channels: 400 samples/sec • Per channel: 100 samples/sec Input Impedance: 1M ohms (min.) Built-in Resistor for Current Input: 120 ohms Power Requirements Input Voltage: 9 to 48 VDC Input Current: • HSPA Model: 442 mA @ 24 VDC • GPRS Model: 494 mA @ 24 VDC • WL1 Model: 406 mA @ 24 VDC MTBF (mean time between failures) Time: • HSPA model: 378,154 hrs • GPRS model: 403,087 hrs • WL1 model: 331,222 hrs Standard: Telcordia SR332 Common Specifications Cellular Standards: GSM/GPRS/EDGE/UMTS/HSPA+ HSPA Model Band Options: • UMTS/HSPA+: five-band 800/850/900/1900/2100 MHz • GSM/GPRS/EDGE: quad-band 850/900/1800/1900 MHz GPRS Model Band Options: GSM/GPRS/EDGE: quad-band 850/900/1800/1900 MHz SIM Control Voltage: 3/1.8 V SIM Format: Full size WLAN Standards: • IEEE 802.11a/b/g for wireless LAN • IEEE 802.11i for wireless security Spread Spectrum and Modulation (typical): • DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps Inputs and Outputs Digital Inputs: 8 channels Configurable DIOs (by software): 8 channels Isolation: 3k VDC or 2k Vrms Digital Input Sensor Type: Wet Contact (NPN or PNP) and Dry Contact I/O Mode: DI or Event Counter Dry Contact: • On: short to GND • Off: open Wet Contact (DI to COM): • On: 10 to 30 VDC • Off: 0 to 3 VDC Common Type: 8 points per COM Counter Frequency: 2.5 kHz Digital Filtering Time Interval: Software configurable Digital Output Type: Sink I/O Mode: DO or Pulse Output Pulse Output Frequency: 5 kHz Over-Voltage Protection: 45 VDC Over-Current Protection: 1.5 A per channel @ 25°C Over-Temperature Shutdown: 175°C (min.) Current Rating: 500 mA per channel @ 25°C DIO Output Leakage Current: < 1 mA @ 30 VDC Power Requirements Input Voltage: 9 to 48 VDC Input Current: • HSPA Model: 390 mA @ 24 VDC • GPRS Model: 416 mA @ 24 VDC • WL1 Model: 328 mA @ 24 VDC MTBF (mean time between failures) Time: • HSPA model: 378,154 hrs • GPRS model: 403,452 hrs • WL1 model: 400,469 hrs Standard: Telcordia SR332 ioLogik 2512 Specifications