16-9 www.mo xa .c o m Smart Remote I/O > ioLogik W5340-HSPA Remote Automation 16 Introduction Automatic Data Updates from SD Cards Following Network Failures When Active OPC Server is used in combination with DA-Center, then following any network failure an ioLogik W5340-HSPA remote client will, upon reconnecting, restore to the central database any data that was accumulated during the downtime. Following a network failure, DA-Center will compare received data stored in the database with the historical data stored locally on the ioLogik W5340-HSPA. If there are any gaps in the database record, DA-Center will restore the missing data by requesting re-transmission from the remote ioLogik client. ioLogik W5340-HSPA The ioLogik W5340-HSPA is a hardy, metal-encased remote I/O unit that combines an HSPA cellular modem, a remote I/O module, and a data logger for use in a wide variety of innovative I/O applications. The ioLogik W5340-HSPA also supports Moxa’s patented Click&Go programming interface, giving engineers a powerful, simple tool that streamlines installation and setup into a nearly effortless process. The ioLogik W5340-HSPA delivers local data logging in a storage space expandable up to 32 GB, and comes with Moxa’s innovative, patented MX-AOPC UA Server or Active OPC Server software to transform network communications from centralized polling by the control system to event-based notifications that originate at the edge. By eliminating constant polling, communications can be brought up to real-time speeds while reducing hardware costs and overall network overhead. The ioLogik W5340-HSPA provides benefits beyond mere cellular connectivity and remote input/output management; it is an ideal solution for any number of industrial applications, including: • Pipeline monitoring for water, oil, and gas facilities • Pump station and lift station monitoring • Environmental monitoring • Security and surveillance Smart HSPA remote I/O with Click&Go Logic › ›Front-end intelligence with patented Click&Go control logic, up to 24 rules › ›Using Active OPC Server software, SCADA systems can directly communicate with cellular devices hidden behind private IP addresses › ›Active communication with Active OPC Server › ›Automatically complement disconnection period data with DA-Center software › ›Daisy chain up to 3 ioLogik E1200 units › ›3-in-1 RS-232/422/485 serial port for connecting to serial devices in the field › ›Supports SNMPv1/v2c › ›Simplify I/O management with MXIO library for Windows or Linux platforms › ›Wide operating temperature range of -30 to 70°C (-22 to 158°F)