16-20 www. m oxa. com Smart Remote I/O > ioLogik E2200 Series Smart Remote I/O 16 ioLogik E2260 Specifications ioLogik E2262 Specifications Common Specifications Inputs and Outputs Digital Outputs: 4 channels RTDs: 6 channels Isolation: 3k VDC or 2k Vrms Digital Output Type: Sink I/O Mode: DO or Pulse Output Pulse Output Frequency: 100 Hz Over-Voltage Protection: 45 VDC Over-Current Protection: 2.6 A (4 channels @ 650 mA) Over-Temperature Shutdown: 175°C Current Rating: 200 mA per channel RTD Sensor Type: PT50, PT100, PT200, PT500, PT1000; JPT100, JPT200, JPT500, JPT1000; NI100, NI120, NI200, NI500, NI1000; Resistance of 310, 620, 1250, and 2200 ohms Input Connection: 2- or 3-wire Inputs and Outputs Digital Outputs: 4 channels Thermocouples: 8 channels Digital Output Isolation: 3k VDC or 2k Vrms Type: Sink I/O Mode: DO or Pulse Output Pulse Output Frequency: 100 Hz Over-Voltage Protection: 45 VDC Over-Current Protection: 2.6 A (4 channels @ 650 mA) Over-Temperature Shutdown: 175°C Current Rating: 200 mA per channel Thermocouple Sensor Type: J (0 to 750°C), K (-200 to 1250°C), T (-200 to 350°C), E (-200 to 900°C), R (-50 to 1600°C), S (-50 to 1760°C), B (600 to 1700°C), N (-200 to 1300°C) Sampling Rate: All channels: 12 samples/sec Per channel: 2 samples/sec Resolution: 0.1°C or 0.1 ohm Accuracy: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C ±0.5% FSR @ -40 and 75°C Input Impedance: 625 kilo-ohms ohms Power Requirements Input Voltage: 12 to 36 VDC Input Current: 95 mA @ 24 VDC MTBF (mean time between failures) Time: 327,282 hrs Standard: Telcordia SR332 Millivolt Type: • Mode: ±78.126 mV, ±39.062 mV, ±19.532 mV • Fault and over-voltage protection: -35 to +35 VDC (power off); -25 to +30 VDC (power on) Sampling Rate: All channels: 12 samples/sec Per channel: 1.5 samples/sec Resolution: 16 bits Accuracy: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C ±0.5% FSR @ -40 and 75°C Input Impedance: 1 mega-ohm ohms Power Requirements Input Voltage: 12 to 36 VDC Input Current: 160 mA @ 24 VDC MTBF (mean time between failures) Time: 341,063 hrs Database: Telcordia SR332 Accuracy: ±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C ±0.5% FSR @ -40 and 75°C Sampling Rate: All channels: 32 samples/sec Per channel: 8 samples/sec Single channel: 100 samples/sec Input Impedance: 200 kilo-ohms ohms (min.) Built-in Resistor for Current Input: 120 ohms LAN Ethernet: 1 10/100 Mbps RJ45 port Protection: 1.5 kV magnetic isolation Protocols: Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP Serial Interface: 1 RS-485-2w terminal block port Parity: None Data Bits: 8 Stop Bits: 1 Flow Control: None Baudrate: 1200 to 115200 bps Protocols: Modbus RTU (gateway) Physical Characteristics Wiring: I/O cable max. 14 AWG Dimensions: 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in) Weight: under 250 g (0.55 lb) Mounting: DIN-rail or wall Power Requirements Input Voltage: 12 to 36 VDC Input Current: 178 mA @ 24 VDC MTBF (mean time between failures) Time: 204,391 hrs Database: Telcordia SR332