17-23 www.mo xa .c o m Remote I/O > ioLogik 4000 Series Remote Automation 17 The unique modular construction of the ioLogik 4000 series allows the mixing and matching of modules to achieve the best combination of I/O modules to meet the needs of a wide range of remote automation applications. The ioLogik 4000 series features an industrial modular housing that allows I/O modules to be added to the base unit without a backplane. The width of each module is only 12 mm, perfect for space-limited applications. The ioLogik 4000 series provides high density I/O points for greater flexibility and expandability. The modules can connect to virtually any type of sensor, including but not limited to those for temperature, pressure, flow, voltage, current, and contact closure. Slice Form Factor and Flexible I/O Variety The ioLogik 4000 series comes with removable spring-type terminal blocks (RTBs) that allow you to conserve field wiring for future use. Each I/O expansion module can be quickly and easily replaced. Easy Maintenance Slice-Type I/O Modules Removable Terminal Block Spring-Type Terminal Block Module Coding Tag ioLogik E4200 Specifications ioLogik 4000 Series The ioLogik 4000 series is suitable for remote monitoring and alarm systems, such as those used for water treatment systems, water supply systems, wastewater treatment systems, and power monitoring systems. These kinds of applications need more I/O points and a Modular remote I/O variety of I/O types, including temperature sensors, gas detectors, and water quality detectors, all of which can benefit from the versatile mixture of I/O features supported by the ioLogik 4000 series. Introduction › ›I/O expansion without a backplane › ›Active communications with MX-AOPC UA Server › ›Supports SNMPv1/v2c › ›Easy configuration with Modular ioAdmin utility › ›Friendly configuration via web browser › ›Simplify I/O management with MXIO library on either a Windows or Linux platform LAN Ethernet: 2 MACs, 10/100 Mbps RJ45 ports Protection: 1.5 kV magnetic isolation Protocols: Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, SNTP, SMTP Serial Interface: 1 RS-232 DB9 male port Parity: None Stop Bits: 1 Flow Control: 115200 bps Protocols: For Moxa OnCell only Power Requirements Input Voltage: 11 to 28.8 VDC Input Current: 175 mA @ 24 VDC Current for I/O Modules: 1.5 A (max.) @ 5 VDC Physical Characteristics Weight: 180 g (0.40 lb) MTBF (mean time between failures) Time: 357,000 hrs Standard: Telcordia SR332