1-46 www. m oxa. com EDS-405A/408A Series 1 Industrial Ethernet Switches Industrial Ethernet Switches > EDS-405A/408A Series Introduction The EDS-405A/408A are entry-level 5 and 8-port managed Ethernet switches designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain, ring coupling, IGMP snooping, IEEE 802.1Q VLAN, port- • DHCP Option 82 for IP address assignment with different policies • Support EtherNet/IP, Modbus/TCP and PROFINET* protocols for device management and monitoring • EtherNet/IP EDS (Electronic Data Sheet) file, custom AOI (Add-On Instructions) and FactoryTalk® View faceplate available • PROFINET GSDML file and SIMATIC STEP 7 device icons available* • IGMP snooping and GMRP for filtering multicast traffic Specifications 5 and 8-port entry-level managed Ethernet switches based VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-405A/408A switches. • Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning • QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism • RMON for efficient network monitoring and proactive capability • SNMPv1/v2c/v3 for different levels of network management security • Bandwidth management to prevent unpredictable network status • Port mirroring for online debugging * EDS-405A/408A-PN series only Features and Benefits › ›Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy › ›IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported › ›Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 › ›PROFINET or EtherNet/IP enabled by default (PN or EIP models) › ›Supports MXstudio for easy, visualized industrial network management Technology Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging Software Features Management: IPv4/IPv6, SNMP v1/v2c/v3, LLDP, Port Mirror, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SMTP, RARP, Telnet, Syslog, SNMP Inform, Flow Control, Back Pressure Flow Control Filter: 802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2, GMRP Redundancy Protocols: STP, RSTP, Turbo Ring v1/v2, Turbo Chain Time Management: SNTP, NTP Server/Client Industrial Protocols: EtherNet/IP, Modbus/TCP MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 Switch Properties MAC Table Size: 2 K (EDS-405A), 8 K (EDS-408A) Packet Buffer Size: 1 Mbit Interface RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Ports: 100BaseFX ports (SC/ST connector) Console Port: RS-232 (RJ45 connector) DIP Switches: Turbo Ring, Master, Coupler, Reserve Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC Optical Fiber 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 μm G.652 800 MHz*km Typical Distance 4 km 5 km 40 km Wave- length Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB). Power Requirements Input Voltage: 24 VDC, redundant dual inputs Operating Voltage: 12 to 45 VDC Input Current: EDS-405A, EDS-405A-EIP, EDS-405A-PN: 0.21 A @ 24 V EDS-405A-MM/SS: 0.28 A @ 24 V EDS-408A, EDS-408A-EIP, EDS-408A-PN: 0.22 A @ 24 V EDS-408A-MM/SS: 0.3 A @ 24 V EDS-408A-3M/3S/2M1S/1M2S: 0.28 A @ 24 V Overload Current Protection: Present Connection: 1 removable 6-contact terminal block Reverse Polarity Protection: Present