IP Surveillance 19-39 www.mo xa .c o m IP Surveillance > VPort 364A Series 19 VPort 364A Series Superior video performance, 4-channel H.264/MJPEG industrial video encoders The VPort 364A 4-channel industrial video encoder with H.264 video compression algorithm provides the best video quality on the market, but with a smaller bandwidth requirement than other video compression standards. In addition, to meet various video stream requirements, the VPort 364A supports dual video streams using Introduction › ›Dual simultaneous H.264 and MJPEG video streams › ›Video latency under 200 ms › ›Moxa DynaStream™ function support for network efficiency › ›ONVIF support for standardization and interoperability › ›802.1X and SSL/SSH for advanced network security › ›Industrial design with -40 to 75°C operating temperature › ›VPort SDK PLUS provided free H.264 and MJPEG compression formats. The two video streams can be used for different purposes, such as viewing, recording, and analysis. In addition, the rugged industrial design, which includes a -40 to 75°C operating temperature range, IP30 form factor protection, and industrial certifications, make the VPort 364A highly suitable for use in harsh environments. Specifications Video Video Compression: H.264 (MPEG4 part 10, AVC) or MJPEG Video Inputs: 4, BNC connector (1.0 Vpp, 75 ohm) Video Streams: Dual streams (one for H.264, the other for MJPEG) NTSC/PAL: Manual Video Viewing: • DynaStream™ support for changing the video frame rate automatically • Adjustable image size and quality • Timestamp and text overlay Video Resolution and FPS (frames per second) in single video stream: NTSC PAL Size Max. FPS Size Max. FPS QCIF 176 x 112 30 176 x 144 25 CIF 352 x 240 30 352 x 288 25 VGA 640 x 480 30 640 x 480 25 4CIF 704 x 480 30 704 x 576 25 Full D1 720 x 480 30 720 x 576 25 Audio Audio Inputs: 1, Line-in or mic-in with RCA connector Audio Outputs: 1, Line-out with RCA connector Audio Format: Mono, PCM Network Protocols: TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/ TCP Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port, or 1 100BaseFX fiber port (single/multi-mode, SC connector) Serial Port PTZ Ports: 1, RS-232/422/485 port (5-pin terminal block connector), max. speed of 115.2 Kbps Console Port: 1, RS-232 RJ45 port GPIO Digital Inputs: 4, max. 8 mA High: +13 V to +30 V; Low: -30 V to +3 V Relay Outputs: 2, max. 24 VDC @ 1 A LED Indicators STAT: System status PWR1: Power 1 PWR2: Power 2 FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network V1, V2, V3, V4: Video input signal activity for channels 1 to 4 Power Requirements Input Voltage: 2 redundant power inputs, 12 to 32 VDC or 18 to 30 VAC, terminal block connector Input Current: 12 to 32 VDC, 0.7 A (max.) or 18 to 30 VAC, 0.68 A (max.) Power Consumption: 7.5 W (max.) Physical Characteristics Housing: Metal, IP30 protection Dimensions: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in) Weight: 1.13 kg (2.49 lb) Installation: DIN-rail mounting (standard), wall mounting (optional) Alarms Video Motion Detection: Includes sensitivity tuning Video Loss: Video loss alarm Scheduling: Daily repeat timing schedule Imaging: JPEG snapshots for pre/trigger/post alarm images Custom Alarms: HTTP event servers and CGI events for setting customized alarm actions Email/FTP Messaging: Automatic transfer of stored images via email or FTP with event-triggered actions Pre-alarm Buffer: 24 MB per channel for JPEG snapshot images