1-71 Industrial Ethernet 1 EDS-P506A-4PoE Series Industrial Ethernet Switches > www.mo xa .c o m Available Models Port Interface PoE+, 10/100BaseT(X) 10/100BaseT(X) 100BaseFX Standard Temperature (0 to 60˚C) Wide Temperature (-40 to 75˚C) Multi-Mode SC Connector Multi-Mode ST Connector Single-Mode SC Connector EDS-P506A-4PoE EDS-P506A-4PoE-T 4 2 – – – EDS-P506A-4PoE-MM-SC EDS-P506A-4PoE-MM-SC-T 4 – 2 – – EDS-P506A-4PoE-MM-ST EDS-P506A-4PoE-MM-ST-T 4 – – 2 – EDS-P506A-4PoE-SS-SC EDS-P506A-4PoE-SS-SC-T 4 – – – 2 Ordering Information Optional Accessories (can be purchased separately) MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes EDS-SNMP OPC Server Pro: OPC server software that works with all SNMP devices ABC-01: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60°C operating temperature DR-75-24/120-24: 75/120 W DIN-rail 24 VDC power supplies DR-75-48/120-48: 75/120 W DIN-rail 48 VDC power supplies DRP-240-48: 240 W DIN-rail 48 VDC power supplies WK-51-01: Wall-mounting kit, 2 plates with 6 screws RK-4U: 4U-high 19-inch rack-mounting kit Package Checklist • EDS-P506A-4PoE switch • Serial Cable: CN20070 • Protective caps for unused ports • Document and software CD • Hardware installation guide (printed) • Warranty card Optical Fiber 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 μm G.652 800 MHz*km Typical Distance 4 km 5 km 40 km Wave- length Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB). Power Requirements Input Voltage: 24/48 VDC, redundant dual inputs Operating Voltage: 22 to 57 VDC Input Current: 5.72 A @ 24 VDC Connection: 2 removable 6-contact terminal blocks Reverse Polarity Protection: Present Power Consumption: Max. 17.28 W full loading without PDs’ consumption Power Budget: Max. 120 W for total PDs’ consumption Max. 30 W for each PoE port Physical Characteristics Housing: Metal IP Rating: IP30 protection Dimensions: 80 x 135 x 131.5 mm (3.15 x 5.31 x 5.18 in) Weight: 1270 g (2.80 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 508 EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: Signal: 10 V IEC 61000-4-8 Rail Traffic: EN 50121-4 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Note: Please check Moxa’s website for the most up-to-date certification status. MTBF (mean time between failures) Time: 433,000 hrs Standard: Telcordia (Bellcore), GB Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Side View Front View Rear View DIN-Rail/Panel-Mounting Kit Dimensions Unit: mm (inch) 80.05 (3.15) 131.5 (5.18) 30 (1.18) 51.6 (2.03) 67 (2.64) 48.39 (1.9) 70 (2.76) 9.75(0.38) 135 (5.31) 15 (0.59) 36.6(1.44) 29.5 (1.16) 30.5 (1.2) 14.3 (0.56) 20 (0.79) 20 (0.79) 14.6 (0.57) 34 (1.34)