1-72 EDS-G205A-4PoE Series 1 Industrial Ethernet Switches Industrial Ethernet Switches > www. m oxa. com EDS-G205A-4PoE Series Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full Gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network. Specifications 5-port full Gigabit unmanaged Ethernet switches with 4 IEEE 802.3af/at PoE+ ports Award-winning Product › ›Full Gigabit Ethernet ports › ›IEEE 802.3af/at, PoE+ standards › ›Up to 30 watts output per PoE port › ›24/48 VDC flexible redundant power inputs › ›Supports 9.6 KB jumbo frames › ›Intelligent power consumption detection and classification › ›Smart PoE over current and short circuit protection › ›-40 to 75°C operating temperature range (T models) Technology Standards: IEEE 802.3af/at for Power-over-Ethernet IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control Processing Type: Store and Forward Switch Properties MAC Table Size: 8 K Packet Buffer Size: 136 KB Jumbo Frame Size: 9.6 KB Interface RJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Ports: 1000BaseSFP slot PoE Pinout: V+, V+, V-, V- for Pin 1,2,3,6 (Endspan, MDI Alternative A) Power Requirements Input Voltage: 12/24/48 VDC, redundant dual inputs Operating Voltage: 12 to 57 VDC Input Current: 5.42 A @ 24 VDC Overload Current Protection: Present Connection: 2 removable 2-contact terminal blocks Reverse Polarity Protection: Present Power Consumption: Max. 10.08 W full loading without PDs’ consumption Power Budget: Max. 62 W at 12 VDC, 120 W at 24 VDC, and 144 W at 48 VDC for total PDs’ consumption, Max. 36 W for each PoE port Physical Characteristics Housing: Metal IP Rating: IP30 protection Dimensions: 29 x 135 x 105 mm (1.14 x 5.31 x 4.13 in) Weight: 300 g (0.66 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: UL 508 EMC: EN 55022/24 EMI: CISPR 22, FCC Part 15B Class A EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 Rail Traffic: EN 50121-4 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6 Note: Please check Moxa’s website for the most up-to-date certification status.