9-21 www.mo xa .c o m 9 Terminal Servers > Serial Connectivity CN2600 Series Specifications Appearance Ethernet Interface Number of Ports: 2 (2 IPs) Speed: 10/100 Mbps, auto MDI/MDIX Connector: 8-pin RJ45 Magnetic Isolation: 1.5 kV built-in Serial Interface Number of Ports: 8 or 16 Serial Standards: CN2610: RS-232 CN2650/2650I: RS-232/422/485 Connector: CN2610/2650: 8-pin RJ45 CN2650I: DB9 male Serial Line Protection: 2 kV optical isolation (CN2650I) RS-485 Data Direction Control: ADDC® (Automatic Data Direction Control) Console Port: Dedicated RS-232 console port on rear panel (8-pin RJ45) Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS, DTR/DSR, XON/XOFF Baudrate: 50 bps to 921.6 kbps Pull High/Low Resistor for RS-485: 1 kΩ, 150 kΩ Terminator for RS-485: 120 Ω Serial Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND RS-485-2w: Data+, Data-, GND Software Network Protocols: ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP, ARP, PPPoE, DDNS Security Protocols: RADIUS, HTTPS, SSH, PAP, CHAP Configuration Options: Web Console, Serial Console, Telnet Console, Windows Utility Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.x Management: SNMP MIB-II IP Routing: Static, RIP-I, RIP-II Operation Modes Standard: Real COM, TCP Server, TCP Client, UDP, RFC2217, Terminal, Reverse Telnet, PPP, DRDAS, Redundant COM, Disabled Applications Terminal Sessions: 8 sessions per port Physical Characteristics Housing: Metal Weight: CN2610-8-2AC: 3,760 g (8.29 lb) CN2610-16-2AC: 3,980 g (8.77 lb) CN2650-8: 3,740 g (8.25 lb) CN2650-16: 3,790 g (8.36 lb) CN2650-8-2AC: 3,900 g (8.60 lb) CN2650-16-2AC: 3,980 g (8.77 lb) CN2650I-8: 3,666 g (8.08 lb) CN2650I-16: 3,776 g (8.32 lb) CN2650I-8-2AC: 3,932 g (8.67 lb) CN2650I-16-2AC: 4,022 g (8.87 lb) CN2650I-8-HV: 3,910 g (8.62 lb) CN2650I-16-HV: 3,930 g (8.66 lb) Dimensions: Without ears: 440 x 198 x 45.5 mm (17.32 x 7.80 x 1.77 in) With ears: 480 x 198 x 45.5 mm (18.9 x 7.80 x 1.77 in) Dual-AC Model Supported Dual-power redundancy uses two power inputs and redundant internal power supplies to ensure that all of the CN2600’s functions will be available, even in the event of power circuit failures. Note: The product shown is the CN2610-8-2AC. HV models (CN2650I-8-HV-T and CN2650I-16-HV-T) use terminal blocks for their power input. Note: LCD panel and configuration buttons are not available for wide temperature models Ground AC power input 100 to 240 VAC input, 47 to 63 Hz LCD panel Reset button IP configuration buttons Ethernet ports RJ45 10/100 Mbps RS-232 console port Serial ports 8-pinRJ45,RS-232/422/485, 50to921.6kbps LED indicators system status, serial Tx/Rx UPS Power Cord Power Cord UPS Failure UPS UPS